MPL-B4530K-SK72AA

The Allen-Bradley/Rockwell Automation MPL-B4530K-SK72AA servo motor is a 400 Volts AC brushless servo motor. When mounting the servo motor, make sure that the cables are installed and restrained properly to prevent uneven tension or flexing at the cable connections. Note that excessive and uneven lateral force on the cable can inhibit environmental sealing if the cable flexes. Also, after mounting the servo motor, lock out and tag out all of the disassembled equipment. Additionally, before applying power to the MPL-B4530K-SK72AA servo motor, mechanical couplings are capable of being thrown out from the shaft and they must be removed first.

The MPL-B4530K-SK72AA servo motor uses circular DIN connectors that are right-angled and rotatable anywhere up to 180 degrees. However, the rotation should only be done once when connecting the cables and then no more rotation should be done. Note that the rotation is enabled to ensure that the connections can be made easily. The servo motor should be mounted with the connectors facing downwards to prevent unnecessary strain on the cables. Moreover, with the connections are made below the servo motor, it is possible to prevent liquids from reaching the connectors by looping the cables and preventing liquids from running along them and damaging the connectors. The Allen-Bradley MPL-B4530K-SK72AA servo motor has an operating speed of 4000 revolutions per minute and it uses standard factory designated control options. For the encoder, the motor uses a single-turn high-resolution feedback encoder, and it has no shaft key or shaft seal. The MPL-B4530K-SK72AA servo motor belongs to the MPL series of servo motors. The servo motors in this series have low inertia but high performance.