MPL-B4540F-MJ24AA

The MPL-B4540F-MJ24AA servo motor is manufactured by Allen-Bradley and it provides a series of innovative features which can bring benefits to an industrial manufacturing system. The MPL-B4540F-MJ24AA servo motor is a part of one of the most trusted low-inertia series of servo motors known as the MPL series which has drives that are noted for high quality and the ability to be integrated easily with AC servo drives. The MPL-B4540F-MJ24AA servo motor has a rated torque of 10.2 N-m or 90 pounds on an inch. To have an efficient system and low heat generation in the servo motor, it is important to calibrate the servo motor so that its continuous operation is always within the rated operating torque range. The MPL-B4540F-MJ24AA servo motor can adapt to the state of the load and deliver decreased positioning time even for peak torque of 240 pounds on an inch, but this kind of operation is allowed only for short periods of time.

The Allen-Bradley MPL-B4540F-MJ24AA servo motor is compatible with almost any AC servo motor, but for fast commissioning and configuration in a few simple steps, it is best to use Allen-Bradley ULTRA and Kinetix series AC servo drives. In the rear part of the servo motor, there is a multi-turn high-resolution encoder that represents a piece of hardware that sends information on the current motor shaft position to the controller. The MPL-B4540F-MJ24AA servo motor has a 460 Volts AC input specification, and a maximum rated motor speed of 3000 rpm. This product is frequently ordered because it provides the things that every industrial automation company needs: premium performance and reliability at a low cost. It is delivered with a 24 Volts DC rated braking system, and it features a rated output power setting of 2.6 kilowatts.