MPL-B520K-MK24AA

The MPL-B520K-MK24AA servo motor is a rotary actuator or linear actuator which allows for the precise control of the angular or linear position, velocity, and acceleration of a machine. The MPL-B520K-MK24AA servo motor has a wide range of speed control applications and it has the fastest response mechanism of any servo motor on the market. It is lightweight with high output power. It can rotate anywhere within approximately 180 degrees (90 degrees in each direction). It has the ability to control the machine’s current based on the state of the load that it is handling. The motor can operate with 400 Volts AC of input voltage. The motor is a 3-phase device and consumes electricity from a 3-phase power source. The MPL-B520K-MK24AA servo motor works efficiently and continuously within the rated torque range for a long time because of the low heat generation of the motor. The servo motor is equipped with an integral 24 Volts DC braking option. The motor needs a temperature between 0 and 40 degrees Celsius for normal operation.

The MPL-B520K-MK24AA servo motor features a multi-turn encoder which provides high-resolution absolute position feedback within 4096 turns. The encoder does not need an extra battery to relay the feedback of the servo motor. The servo motor comes with smart motor technology. It features an onboard memory which can help to retain the motor identity. The RS-485 communication link on the servo motor automatically reports the motor identity to the system when the motor is started up. It also reduces the commissioning time of the motor. The MPL-B520K-MK24AA servo motor uses an IEC metric flange to install the motor in different areas. The motor has factory designated options and it is certified with different agency certifications. This low-inertia servo motor uses a magnetic stack length of 2 inches. During the installation of the servo motor, shields should be added that help to protect the motor housing, shaft seals, and their junctions from dust, dirt, and other corrosive gases.