MPL-B520K-SK24AA

The MPL-B520K-SK24AA servo motor is an Allen-Bradley servo motor and it is used in a wide variety of applications where controlling the position of a machine is a necessity. These servo motor devices are equipped with highly sensitive feedback devices which keep track of the motor’s operating information. This information is then passed on to the operator of the motor. The MPL-B520K-SK24AA servo motor runs with 400 Volts AC of input armature voltage and it has a speed rating of 4000 rpm. A 24 Volts DC brake is attached to the motor which is used to control the speed of the motor. This servo motor lacks a shaft key. Also, due to the absence of a shaft seal, the motor is not water resistant. An extra shaft seal can be added to the servo motor which increases the waterproof ability to the servo motor. The additional shaft seal comes with an IP 66 protection rating. The operating temperature range for the motor should be between 0 and 40 degrees Celsius. Mounting the servo motor is also possible by using the IEC metric flange that helps in the installation of the servo motor in different locations.

The MPL-B520K-SK24AA servo motor is housed inside a 165-millimeter housing. The internal parts of the servo motor is made of stainless steel. The servo motor has a robust build. It uses a circular bayonet as a connector shaft. The motor has a constant stall torque rating of 4.13 N-m 37 pounds on an inch. The motor uses a peak constant current of 6.1 Amps. The MPL-B520K-SK24AA servo motor is a series A motor and it is a 3-phase device. This 3-phase motor is compactly manufactured and it weighs only 13 pounds. The motor uses voltage as the PWM source. The motor runs with a frequency between 0 and 334 Hertz. The exact frequency depends upon the load that is being handled.