MPL-B520K-SK74AA

Designed and engineered by Allen-Bradley, the MPL-B520K-SK74AA servo motor is a low-inertia servo motor. The MPL-B520K-SK74AA servo motor features a power voltage rating of 460 Volts AC. The unit comes with a frame size of 165 millimeters. The MPL-B520K-SK74AA servo motor features a single-turn high-resolution encoder. The single-turn high-resolution encoder provides the permanent magnet servo motors like the MPL-B520K-SK74AA servo motor with the position of the motor stator relative to the rotor upon startup for the improved torque control. To prolong the motor life, provide a drip loop in each of the cables. This ensures that liquids are carried away from the connections to the motor.

The Allen-Bradley MPL-B520K-SK74AA servo motor comes with no shaft key and no shaft seal while the servo motor has a circular DIN, right angle, 180 degrees rotation connector. The servo motor connectors are designed to be rotated into a fixed position during motor installation. These connectors will remain in the same position and do not necessarily have to be adjusted. The MPL-B520K-SK74AA servo motor features a magnet stack length of 2.0 inches and it comes with a motor rated speed of 4000 revolutions per minute. The Allen-Bradley servo motors like this one come with a mounting pilot that is used for aligning the motor on the machine. According to the manufacturer, it is recommended to use stainless steel fasteners. It is important to ensure compliance with the electrical local regulations to promote safety and EMI compatibility. The MPL-B520K-SK74AA servo motor features an operating temperature range of 0 to 40 degrees Celsius. The ambient storage temperature range for the MPL-B520K-SK74AA servo motor is from -30 to 70 degrees Celsius, with a relative humidity range of 5 to 95%. Ensure that the MPL-B520K-SK74AA servo motor is stored in a non-corrosive environment in order to prolong its life.