MPL-B540D-SJ72AA

The MPL-B540D-SJ72AA servo motor is a rotary actuator device that is used in the control of the position, acceleration, or velocity of a machine. It allows for the precise control of angular or linear machine position. The MPL-B540D-SJ72AA servo motor has been developed and manufactured by Allen-Bradley. It is manufactured to cater to different industry needs. It comes with standard factory-designated options. A servo motor consists of a DC motor, a potentiometer, and a controller circuit. The input voltage for the device is 400 Volts AC. The housing of the servo motor has a frame size of 165 millimeters. The servo motor rotates with a speed of 2000 rpm. A keyed shaft extension is present and the servo motor is equipped with a magnetic stack length of 4 inches. The MPL-B540D-SJ72AA servo motor has no shaft seal when it is manufactured. Adding a shaft seal gives the servo motor gives it an IP 67 protection rating.

The MPL-B540D-SJ72AA servo motor uses premium permanent motor magnets and it is a low-inertia servo motor. No braking option is available in this servo motor. A digital single-turn encoder is used as a feedback encoder. The servo motor has free mounting holes. There are certain requirements that should be met during the installation of the MPL-B540D-SJ72AA servo motor. The installation area should have no trace of EMC noise which might cause performance degradation. Other corrosive gasses and vapors should also be absent. Heat producing device should be kept far away from the MPL-B540D-SJ72AA servo motor. The environment should be relatively humid with non-condensing humidity between 5 and 95%. The MPL-B540D-SJ72AA servo motor uses a circular DIN rail with a right-angle orientation for connector purposes. It is 180 degrees rotatable. This 3-phase device is mostly used in elevators, rudders, and operating grippers. The servo motor can be used with other Allen-Bradley compatible devices.