Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley MPL Servo Motors MPL-B540K-MK74AA

Product image is representative; revision or series may vary. Contact us to request a specific version.

MPL-B540K-MK74AA

|
Need a Specific Revision?

This low rotor inertia AC motor built by Allen Bradley is a 4000 rpm MPL servo. It is a 165 mm frame motor and is powered on with 400 volt. Also, it comes with a magnetic stack length of 4 inch. In addition, it has a high-resolution multi-turn encoder. It can be connected by circular DIN connectors which are installed on this adaptible servo motor.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for MPL-B540K-MK74AA

ManufacturerAllen Bradley
CategoryMotors
Product LineMPL Servo Motors
Part NumberMPL-B540K-MK74AA
UPC820919984136
Weight40.13 lbs (18.20 kg)
SeriesPremium permanent magnet rotary servo motor
Series TypeLow-inertia
Voltage Class400 Volts AC
Frame Size165 millimeters
Magnetic Stack Length4 inches
Rated Speed4000 rpm
FeedbackMulti-turn high-resolution encoder
Shaft Key/SealNo shaft key/no shaft seal
ConnectorsCircular DIN, right angle, 180 degrees rotatable
Brake24 Volts DC brake
Mounting FlangeIEC metric
Factory Designated OptionsStandard
View as PDF
Request a Repair

The Allen-Bradley MPL-B540K-MK74AA servo motor is a microprocessor-based servo motor rated for 4000 rpm speed. It is a low-inertia MP series servo motor which accepts 400 Volts AC input and delivers 4000 rpm of speed and 5.4 kilowatts of output power. Industrial applications for the MPL-B540K-MK74AA servo motor include automotive, packaging, and electronics assembly applications. The MPL-B540K-MK74AA servo motor is a premium permanent magnet servo motor which is compatible with multiple drive families from Allen-Bradley including the Kinetix 5700, Kinetix 7000, and Ultra 3000 drives. For use with Kinetix 5700 drives, a Hiperface to DSL feedback kit is required. The continuous stall torque rating is 19.4 N-m and the peak stall torque rating is 48.6 N-m. The rotor inertia for the motor is 0.00147 kg-m2.

The MPL-B540K-MK74AA servo motor weight is approximately 15 kilograms. The integrated features available on the MPL-B540K-MK74AA servo motor include a 24 Volts DC brake, a circular DIN connector for interfacing with drives, a 1024 sin/cos of absolute multi-turn encoder feedback, and an IEC metric flange. Environmentally sealed cable connectors should be used for all the cables. The frame size and magnet stack length for the MPL-B540K-MK74AA servo motor are 165 millimeters and 101.6 millimeters, respectively. Neither a shaft key nor a shaft seal are available on the MPL-B540K-MK74AA servo motor. The lack of a shaft seal gives the motor an environmental protection rating of IP 50. A shaft seal kit known as the Allen-Bradley MPL-SSN-F165 kit is available for the MPL-B540K-MK74AA servo motor. The recommended temperature ranges for motor operation and storage are 32 to 104 degrees Fahrenheit and -22 to 158 degrees Fahrenheit, respectively. The atmosphere where the servo motor is installed or stored should be non-corrosive.

Revision Part #Also known as
MPL-B540K-MK74AA Ser AMPL-B540K-MK74AA/A, Series A, Rev A
Don't see your particular revision? Contact us now.