MPL-B540K-SK22AA

The MPL-B540K-SK22AA servo motor is an MPL series low-inertia servo motor manufactured by Allen-Bradley for use in motion systems that require small servo motors that offer more power and outstanding torque performance than other small servo motors. The speed rating of this motor is 4000 revolutions per minute, 0.000147 kg-m2 rotor inertia, and its stall torque rating is 19.4 N-m. The MPL-B540K-SK22AA servo motor runs on 460 Volts AC input voltage, its power rating is 5.4 kilowatts, and its continuous current is 20.5 Amps. This servo motor has a frame size of 165 millimeters and it features a single-turn high-resolution encoder for feedback.

By relying on the capabilities of its high-end winding insulation, the MPL-B540K-SK22AA servo motor provides greater heat transfer and thermal management, allowing it to maintain a high level of performance for extended periods without overheating. The compact design and quicker acceleration provided by the servo motor allows engineers and OEMs to design small yet powerful and efficient motion systems. It connects to controllers and accessories through its circular bayonet connector. Note that the MPL-B540K-SK22AA servo motor does not have a factory-installed brake. Using the MPL-B540K-SK22AA low-inertia servo motor in an industrial environment where its shaft may come into contact with debris or corrosive compound requires the installation of a shaft seal kit near the motor’s front bearing to protect the bearings and internal components. Installing the shaft seal provides an IP 66 environmental protection rating only at the motor shaft. Achieving an IP 66 protection rating for the entire motor requires the use of environmentally sealed cables and motor-end connector kits.