MPL-B560F-MK24AA

The MPL-B560F-MK24AA servo motor is a servo motor with a mechanism for detecting its position that belongs to the Allen-Bradley MPL series of low-inertia permanent magnet servo motors. This servo motor is useful in applications that require advanced capabilities and also applications that require a motor that operates in a certain position. The Allen-Bradley MPL-B560F-MK24AA servo motor has a multi-turn high-resolution feedback encoder that enables the servo motor to register several turns and at the same time to take note of the servo motor’s position. This servo motor operates with a voltage of 400 Volts AC and a rotation speed of 3000 rpm. It has a magnet stack length of 6 inches and a frame size of 115 millimeters.

It is important to note that during operation, the ambient air temperature around the MPL-B560F-MK24AA servo motor should not exceed 40 degrees Celsius, and that some of the servo motor’s surfaces can reach 125 degrees Celsius during operation. These 2 facts need to be taken into account when selecting the motor cables and wirings and in order to place a warning about the hot surfaces in order to reduce or minimize the risks of accidents. Another important recommendation is to disconnect the power from the Allen-Bradley MPL-B560F-MK24AA servo motor when installing, removing, or replacing any of the cables or wiring. The Allen-Bradley MPL-B560F-MK24AA servo motor does not have a shaft key or shaft seal but these can be added on when necessary. There is a series of shaft seal kits available in the Allen-Bradley catalog and their main function is to protect the servo motor when it comes into contact with liquids.