MPL-B560F-SJ72AA

The Servo motor with catalog number MPL-B560F-SJ72AA is part of the Kinetix MPL series. This servo motor series is a low inertia type with rating of 0.00213 kg-m2 (0.0019 lb-in.-s2), high torque to size ratio with Torque ratings 26.8 Nm (237 lb-in) continuous stall Torque and 67.8 Nm (600 lb-in) Peak stall Torque. It delivers an output power of 5.5 kW with maximum rated speed of 3000 rpm. The MPL-B560F-SJ72AA operates at input supply voltage of 460 VAC, 3-phase with motor frame that measures 165 mm and magnet stack length of 152.4 mm or 6.0 inches. For process connection, this servo motor uses a right-angle Circular (SpeedTec) DIN connector is rotatable up to 180degrees and secures connection in a quarter turn. For position feedback, this motor has a built-in 1024 sin / cos single-turn, high resolution absolute encoder. The MPL-B560F-SJ72AA supports Smart Motor Technology wherein an on-board memory retains the motor identity, allowing it to be discovered in a network of servo motors. The built-in encoder is also capable of communicating using the Hiperface (Stegmann) protocol which is an industry recognized protocol between an encoder and the servo drive. Position feedback is digitally exchanged in a high-speed and efficient manner. The SpeedTec DIN connectors utilized by the MPL-B560F-SJ72AA servo motor is UL Listed, ROHS, REACH, NFPA 79 compliant connection method. It follows the DESINA cable jacket coloring standard with insulation rating of 600 V. Optional accessories that can be used with the MPL-B560F-SJ72AA servo motor include optional shaft seal kits, motor cable and motor end connector.

The MPL-B560F-SJ72AA servo motor is an MP-series low-inertia servo motor manufactured by Allen-Bradley, a division of Rockwell Automation. The MPL-B560F-SJ72AA servo motor falls under the class B servo motor voltage classification featuring a voltage of 430 Volts AC. The MPL-B560F-SJ72AA servo motor comes with an IEC metric mounting flange and standard factory designated options. The MPL-B560F-SJ72AA servo motor also comes with a rated motor speed of 3000 revolutions per minute while the servo motor comes with the single-turn high-resolution encoder. The Allen-Bradley low-inertia servo motor features the circular DIN, right-angle 180 degrees rotatable connectors and it is designed with a 165 millimeters frame size. Only authorized technicians should be allowed to install the MPL-B560F-SJ72AA servo motor in order to ensure that the appropriate installation procedures are followed. The environmental conditions might affect the functioning of the MPL-B560F-SJ72AA servo motor. Ensure that the unit is installed in an environment where the storage and the operating temperatures do not exceed the manufacturer’s specifications. The ambient storage temperature range for the MPL-B560F-SJ72AA servo motor is -30 to 70 degrees Celsius while the ambient operating temperature range is 0 to 40 degrees Celsius. If the MPL-B560F-SJ72AA servo motor is installed in a dirty and non-ventilated environment, this may result in overheating and component or motor failure. The Allen-Bradley servo motor mechanical connections and their bearings might wear out. This results in lost elasticity which affects the operation of the servo motor. Check the mechanical connections frequently for any loose ones. This preventive maintenance extends the life of the drive.