MPL-B580F-MJ22AA

The Kinetix MPL-B580F-MJ22AA servo motor is an MPL series low-inertia servo motor with permanent magnet technology. It is designed and developed by Allen-Bradley for industrial applications. When used with an Allen-Bradley Kinetix series servo drive, the motor is suitable for applications such as converting, packaging, and electronic assembly applications. The rated rotor speed of the MPL-B580F-MJ22AA servo motor is 3000 RPM. The maximum rotor speed of the motor is also 3000 RPM. The frame size and magnet stack length of the servo motor are 165 millimeters and 203.2 millimeters or 8 inches, respectively. The approximate motor weight is 25.4 kilograms. The motor has a rated power output of 7.1 kilowatts. The continuous stall torque is 34 N-m and the peak stall torque is 87 N-m. The continuous stall current rating is 26 Amps and the peak stall current rating is 94 Amps.

The input voltage rating of the Allen-Bradley MPL-B580F-MJ22AA MPL series low-inertia servo motor is 400 Volts. The shaft on the MPL-B580F-MJ22AA servo motor has a shaft key but no shaft seal. Shaft seal kits are available as field-upgradeable options for this servo motor. When properly installed, the seal gives the servo motor an IP 66 protection rating. It should be noted that shaft seals degrade with use, and should therefore be inspected periodically and replaced when required. Motor-end connector kits are available for clients who wish to build custom cables for this servo motor. The connector on the MPL-B580F-MJ22AA servo motor is a bayonet connector that faces in the direction of the motor shaft. The MPL-B580F-MJ22AA servo motor does not include a holding brake. The encoder on the motor is a multi-turn absolute encoder. Only trained and qualified technicians should handle and install this servo motor.