Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley MPL Servo Motors MPL-B580F-RJ22AA

Product image is representative; revision or series may vary. Contact us to request a specific version.

MPL-B580F-RJ22AA

|
Need a Specific Revision?

The Allen-Bradley MPL-B580F-RJ22AA servo motor is an MPL series servo motor. It has a rated power output of  7.1 kilowatts. The feedback device on the MPL-B580F-RJ22AA servo motor is a resolver.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for MPL-B580F-RJ22AA

ManufacturerAllen Bradley
Product TypeServo Motor
Product LineMPL Servo Motors
Part NumberMPL-B580F-RJ22AA
Weight32.00 lbs (14.51 kg)
Protection RatingIP 50
MountingFlange Mounting
Voltage Type400 Volts
Rated Speed3000 RPM
ConnectorBayonet
Holding BrakeNone
FeedbackResolver
Power Output Rating7.1 Kilowatts
Shaft SealNone
Request a Repair

The MPL-B580F-RJ22AA servo motor is an Allen-Bradley MPL series brushless servo motor with permanent magnet technology. It is rated for 3000 RPM of regular rotor speed, 34 N-m of continuous stall torque, 87 N-m of peak stall torque, 26 Amps of continuous stall current, and 94 Amps of peak stall current. The rated rotor inertia is 0.00289 kilograms per square meter. The MPL-B580F-RJ22AA servo motor has a rated output of 7.1 kilowatts. The weight of the servo motor is approximately 25.4 kilograms.  The frame size of the MPL-B580F-RJ22AA servo motor is 165 millimeters. The voltage class to which the motor belongs is the 400 Volts voltage class. The feedback device on the MPL-B580F-RJ22AA servo motor is a resolver. The shaft on the MPL-B580F-RJ22AA servo motor has a key but not a shaft seal. Shaft seals are available as optional items. Proper installation of shaft seals gives the servo motor a protection rating of IP 66. Motors without a shaft seal have a minimum protection rating of IP 50.

The radial load force ratings for the Allen-Bradley MPL-B580F-RJ22AA MPL series brushless permanent magnet servo motor are 153 kilograms at 1000 RPM, 121 kilograms at 2000 RPM, and 106 kilograms at 3000 RPM. The axial load force ratings for the motor are 52 kilograms at 1000 RPM, 43 kilograms at 2000 RPM, and 32 kilograms at 3000 RPM. The axial load force ratings for the motor at zero radial load are 67 kilograms at 1000 RPM, 49 kilograms at 2000 RPM, and 41 kilograms at 3000 RPM. The MPL-B580F-RJ22AA servo motor has a bayonet type of power connector. A holding brake, if required, has to be ordered separately for this servo motor. The motor is made to be flange mounted and it features an IEC metric flange. The MPL-B580F-RJ22AA servo motor should not be lifted by the shaft.