MPL-B580J-MK24AA

The MPL-B580J-MK24AA servo motor is an MPL series low-inertia rotary servo motor manufactured by Allen-Bradley. Its input voltage is 460 Volts AC and it can operate at 3800 revolutions per minute. Its output power is rated at 7.9 kilowatts and its rotor inertia is 0.00289 kg-m2. The continuous stall torque of this motor is 34 N-m and its continuous stall current is 32 Amps. A 24 Volts DC holding brake is built into the MPL-B580J-MK24AA servo motor to hold its shaft at 0 revolutions per minute when the motor needs to stop between operations or when it is not in use. The holding brake on this motor is spring-set and it only gets released when power is applied to its coil. If the line power is lost, the holding brake can temporarily act as a stopping brake.

The MPL-B580J-MK24AA servo motor offers quicker acceleration and higher torque performance across different speeds than other servo motors. It is suitable for use in different applications and environments. When the correct shaft seal is installed at the base of the motor shaft, it provides an IP 66 environmental protection rating to protect the bearings from liquids, debris, and fine dust. The feedback device on the MPL-B580J-MK24AA Servo motor is a multi-turn high-resolution encoder. The MPL-B580J-MK24AA servo motor is able to maintain its high performance even with a sustained shaft load. It features circular bayonet connectors and its frame size is 165 millimeters. This servo motor incorporates insulation materials that provide quick and efficient heat transfer to prevent overheating and to avoid any reductions in the motor’s performance.