MPL-B580J-SJ22AA

The Allen-Bradley MPL-B580J-SJ22AA is a Kinetix servo motor from Allen-Bradley. This Servo motor is part of the low inertia output servo motors that is especially designed for use in Packaging, Converting, Material handling, Electronic assembly, Automotive and similar applications and compatible to be driven by a number of Servo drives from the same Kinetix platform such as Kinetix 5500, Kinetix 5700, Kinetix 6200/6500, Kinetix 6000, Kinetix 300/350, Kinetix 2000, and Kinetix 7000. This Kinetix servo motor is a 400V class brushless AC synchronous AC motor with frame size of 165 mm and magnetic stack that measures 203.2 mm or 8.0 inches. It operates at top speed of 3800 revolutions per minute (rpm). This servo motor is designed with DIN sockets that are directly compatible with the SpeedTec DIN cable connectors, providing fast, secure and less susceptible to vibration and shock. This connector connects in a quarter turn and comes in a 90 Degree orientation for maximum flexibility and to avoid bending especially that the MPL-B580J-SJ22AA servo motor is recommended to be installed with a drip loop wherein, incoming cable connection enter beneath the motor to prevent process liquid from going into the connection point. The MPL-B580J-SJ22AA utilizes a single turn high resolution, absolute encoder. It communicates with the parent servo drive using the Hiperface digital communication method. This servo drive is without a shaft seal installed. Compatible shaft seal for use with this servo method has catalog number of MPL-SSN-F165-32MM. Shaft seals are to be serviced depending on the motor’s utilization. Recommended servicing is within a 3-month period with the lowest frequency of once in 12 months.

The Allen-Bradley MPL-B580J-SJ22AA AC servo motor is a brushless and noise-free AC synchronous servo motor with an absolute type of feedback device designed to meet the tough needs of a closed-looped high-performance control system. Unlike ordinary servo motors in its class, the Allen-Bradley MPL-B580J-SJ22AA servo motor comes with innovative winding technology that offers up to 40% higher torque per size than regular servo motors, and it has an impressive thermal management system for enhanced performance. The MPL-B580J-SJ22AA servo motor has a 400 Volts AC voltage rating with a motor power rating of 7.9 kilowatts, and a maximum motor speed of 3800 rpm. At this speed, this servo motor can maintain a continuous stall torque value of 301 pounds on an inch and it has a peak stall torque rating of 770 pounds on an inch at 115 Amps. The MPL-B580J-SJ22AA servo motor has a single-turn type of encoder that provides high-resolution position feedback over a short distance, and it also has the circular bayonet type of switch connector for both feedback and power. It has an onboard memory that retains the motor identity, and communication links that automatically relay the motor identity to the system upon startup. The MPL-B580J-SJ22AA servo motor has an aluminum type of housing with a carbon steel key shaft and an IP 50 ingress protection code. It has a magnetic stack length of 5 inches, and a frame diameter of 165 millimeters. The MPL-B580J-SJ22AA servo motor has a factory designated 0 to 40 degrees Celsius operating temperature range, and it can be stored within a temperature range of -30 to 70 degrees Celsius. The MPL-B580J-SJ22AA servo motor weighs approximately 25.4 kilograms (56 pounds), and it is UL, CSA, and CE certified.