MPL-B580J-SJ24AA

The Allen-Bradley MPL-B580J-SJ24AA servo motor is a 400 Volts AC premium permanent magnet brushless servo motor. It has been utilized in various industrial applications. Its main advantage is that it is a small device with high levels of power and energy efficiency. Industrial applications supported by the MPL-B580J-SJ24AA include manufacturing, packaging, robotics, pharmaceutics, and food service applications. This 7.9 kilowatts rated AC servo motor is controlled with an electric signal from Kinetix AC servo drives which regulate the speed and position of the motor shaft. There is feedback signal information sent from the servo motor to the servo drive over a single-turn high-resolution encoder to enable extremely precise position and speed control. This encoder is positioned in the rear part of the motor along with a 24 Volts DC brake.

The Allen-Bradley MPL-B580J-SJ24AA servo motor belongs to the Allen-Bradley MP low-inertia series of servo motors that are built to meet a wide range of specific requirements from industrial high-performance motion systems. The device is engineered to meet the EMC standards, and it also holds the CE rating. The MPL-B580J-SJ24AA servo motor should be installed according to instructions from the manual delivered with the device in a clean area that has an ambient temperature between 0 and 40 degrees Celsius. It is always good to have air flow from some ventilation source that will reduce the heat around the motor’s housing. The MPL-B580J-SJ24AA servo motor uses circular bayonet connectors to be safely and efficiently connected to a power source and a servo drive. The rated speed of this MPL series AC servo motor is 3750 rpm.