Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley MPL Servo Motors MPL-B580J-SJ74AA

Product image is representative; revision or series may vary. Contact us to request a specific version.

MPL-B580J-SJ74AA

|
Need a Specific Revision?

The Allen-Bradley MPL-B580J-SJ74AA MPL series servo motor is a low inertia servo motor. It has a frame size of 165 millimeters. The rated rotor speed of the MPL-B580J-SJ74AA servo motor is 3750 RPM.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for MPL-B580J-SJ74AA

ManufacturerAllen Bradley
Product TypeServo Motor
Product LineMPL Servo Motors
Part NumberMPL-B580J-SJ74AA
Weight32.00 lbs (14.51 kg)
Voltage Rating400 Volts
MountingFlange Mounting
Protection ratingIP 50
Holding BrakeYes
ConnectorSpeedTec DIN Connector
Rated Speed3750 RPM
Shaft SealNone
Frame Size165 millimeters
Magnet Stack Length8 Inches
Request a Repair

The MPL-B580J-SJ74AA servo motor is an Allen-Bradley MPL series low inertia permanent magnet servo motor. It comes with several key integrated features, including a single-turn encoder for feedback and a holding brake. The encoder supports Hiperface. The voltage rating for the holding brake is 24 Volts DC. The MPL-B580J-SJ74AA servo motor is flange mounted and it has IEC 72-1 mounting dimensions. The input of the motor is designed for 400 Volts AC rated voltage. The frame size of the MPL-B580J-SJ74AA servo motor is 165 millimeters and the length of the magnet stack in the motor is 203.2 millimeters or 8 inches. The motor shaft does not come with a shaft seal. As a result, the protection category of the motor housing is IP 50. If an optional shaft seal is properly installed, the protection category of the motor improves to IP 66.

The rated rotor speed of the Allen-Bradley MPL-B580J-SJ74AA MPL series servo motor is 3750 RPM. The motor shaft is keyless. The right-angle circular DIN connector on the motor can be rotated up to 180 degrees. The environmental specifications for the servo motor include a 32 to 104 degrees Fahrenheit working temperature range, a -22 to 158 degrees Fahrenheit storage temperature range, and a 5 to 95% non-condensing relative humidity range for operation and storage. During motor installation, a drip loop should be provided in each cable to carry liquids away from the motor connection points. Due to frequent wear and tear, shaft seals should be inspected and replaced about every 3 months. The motor’s holding brake needs a separate power source from the MPL-B580J-SJ74AA servo motor. Shields should be provided, if possible, for the shaft seals and motor housing to protect them.