MPL-B580J-SK24AA

The Allen-Bradley MPL-B580J-SK24AA is a 7.9 kW, 32.0 A continuous stall current and 115.0 Peak stall current rated servo motor. This servo motor is part of the Kinetix Motion control system that also provides continuous stall Torque of 34.0 N-m and 87.0 N-m peak stall current. The MPL-B580J-SK24AA is specifically part of the MPL series of low inertia servo motors. This servo motor has rotor inertia ratings of 0.00289 kg-m2 or 0.0023 lb-in.-s2. It may be operated up to 3800 revolution per minute (rpm) and uses a 1024 sin / cos single-turn absolute encoder for reporting the motor’s position feedback. The MPL-B580J-SK24AA is of a brushless AC synchronous motor that is categorized as a 400 V class motor, operated when supplied by an input supply voltage of 460 VAC, 3-phase. It is a stand-alone device that requires use of a servo drive to implement the desired motion. Compatible servo drive that can be used with the MPL-B580J-SK24AA servo motor are Kinetix 5500, Kinetix 5700, Kinetix 6200/6500, Kinetix 6000, Kinetix 300/350, Kinetix 2000, and Kinetix 7000. The MPL-B580J-SK24AA is compatible for use in a variety of industrial applications except food applications. Compatible applications include Packaging, Converting, Material handling, Electronic assembly and Automotive systems. The MPL-B580J-SK24AA has an IP50 minimum protection rating. IP65 / IP66 can be attained if installed with an appropriate shaft seal with catalog number MPL-SSN-F165-32MM and environmentally sealed cables. Cables must be installed forming a drip loop to drive process liquids from moving into the connection point and prevent potential damage to the motor.

The MPL-B580J-SK24AA 3-phase AC servo motor made by Allen-Bradley/Rockwell Automation is a member of the MPL series of low-inertia, high output servo motors. It is constructed with a rare-earth permanent magnet rotor that rotates under the action of the magnetic field formed by stator that has windings that are supplied with electricity controlled by an AC servo driver. At the back of the whole servo motor, there is a directly coupled single-turn high-resolution encoder which sends the feedback signal back to AC servo drive to compare its value with the target value to form the control signal for the servo motor. The MPL-B580J-SK24AA servo motor runs on 460 Volts AC, it has a 165-millimeter frame size, and its magnetic stack length is 8 inches. The drive’s output power rating is 7.9 kilowatts, and its continuous current rating is 32 Amps. Its shaft can rotate at a maximum speed of 3800 rpm and it can handle a continuous stall torque of 301 pounds on an inch. The Allen-Bradley MPL-B580J-SK24AA servo motor requires very little maintenance because its rotation is achieved by means of electrical commutation and only the bearings need to be periodically checked for any signs of deterioration and replaced it necessary. The expected lifespan for the bearings is more than 20,000 working hours. Because this servo motor model does not have a shaft seal, small metal parts and grease should be removed from the shaft on a regular basis. The MPL-B580J-SK24AA servo motor provides fast acceleration and high torque, and it is equipped with a 24 Volts DC brake mechanism. It comes from the factory as an IP 50 protected device with standard control options, and it is a CE, UL, and CSA standardized device.