Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley MPL Servo Motors MPL-B640F-SJ24AA

Product image is representative; revision or series may vary. Contact us to request a specific version.

MPL-B640F-SJ24AA

|
Need a Specific Revision?

The MPL-B640F-SJ24AA servo motor is an MPL series 400 Volts AC servo motor developed by Allen-Bradley/Rockwell Automation. This small-frame servo motor has a maximum rated rotor speed of 3000 RPM, and an output power of 6.11 kilowatts. The MPL-B640F-SJ24AA servo motor is equipped with a SinCos multi-turn absolute encoder and it has a bayonet-style circular connector.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for MPL-B640F-SJ24AA

ManufacturerAllen Bradley
CategoryMotors
Product LineMPL Servo Motors
Part NumberMPL-B640F-SJ24AA
Weight100.00 lbs (45.36 kg)
DescriptionServo Motor
Inertia TypeLow Inertia
Voltage Class400 Volts
Frame Size215 Millimeters
Rated Speed3000 RPM
Magnet Stack Length4 Inches
Feedback1024 sin/cos, Absolute Single-Turn Encoder
EnclosureIP 50 Minimum (IP 66 with Shaft Seal)
Shaft KeyKeyed Shaft Extension
ConnectorsCircular Bayonet Connector
Brake Option24V DC Holding Brake
MountingFlange, IEC Metric, Free Mounting Holes
Request a Repair

The MPL-B640F-SJ24AA MPL series servo motor is a 400 Volts voltage class AC servo motor developed by Allen-Bradley/Rockwell Automation. With high torque density and low inertia, it is one of the MPL series servo motors that is constructed with innovative copper winding and brushless permanent magnet technology. This small-frame servo motor produces a maximum rated rotor speed of 3000 RPM, and a peak torque rating of 72.3 N-m. This servo motor comes with a 24 Volts DC holding brake integrated on its rotor. The brake rotor inertia of the MPL-B640F-SJ24AA servo motor is 0.004 kilograms per square meter and it weighs around 59 pounds. The spring-set holding brake on the servo motor can occasionally serve as a stopping brake but it is specifically designed to hold the motor shaft at 0 RPM for up to the rated brake holding torque of 619 pounds on an inch. The MPL-B640F-SJ24AA low-inertia AC synchronous servo motor’s rare-earth magnet technology gives it a high level of power density and higher levels of acceleration than conventional servo motors.

The Allen-Bradley MPL-B640F-SJ24AA MPL series low inertia permanent magnet servo motor comes with a threaded shaft and a shaft key that allows for rotating mechanical elements to connect with the motor shaft. It is a smart motor that uses Allen-Bradley “smart motor technology” to provide automated detection of precise motor-drive connections and optimal motion control system performance. When paired with compatible servo drives from Allen-Bradley, it functions as part of a high-performance industrial servo system. The MPL-B640F-SJ24AA servo motor is equipped with a SinCos multi-turn absolute encoder and it has a bayonet-coupling circular connector. For easy commissioning, the drive can access the electronic nameplate by using the Hiperface protocol interface on the motor connector. The MPL-B640F-SJ24AA servo motor has 3 reverse bayonet-coupling circular connectors, one for transmitting feedback signals to and from servo drives, one for supplying power to the motor, and one for actuating the holding brake that comes with this servo motor.