MPL-B640F-SJ72AA

The Allen-Bradley/Rockwell Automation MPL-B640F-SJ72AA servo motor is a 400 Volts AC servo motor. The motor installation must comply with all the local regulations and the installation practices that promote safety and electromagnetic compatibility. Before powering on the MPL-B640F-SJ72AA servo motor for the first time right after installation, all the disconnected mechanical couplings and cables must be cleared away since they can lead to fatal injuries. Additionally, the servo motor should only be powered on after it has been mounted and before powering the servo motor on, verify that all the cables are installed and restrained to prevent uneven tension or flexing at the connectors. Make sure to provide support at 3-meter intervals throughout the length of the connected cables.

The MPL-B640F-SJ72AA servo motor has an operating temperature rating of between 0 and 40 degrees Celsius. As part of ensuring that the motor’s ambient temperature is within this range, the MPL-B640F-SJ72AA servo motor should be mounted in an environment with enough clearance for proper ventilation. Note that a naturally cool environment will enhance the performance of the MPL-B640F-SJ72AA servo motor. When it is being stored, the servo motor’s environment should have a surrounding temperature between -30 degrees Celsius and 70 degrees Celsius. Note that the storage environment should also be free from corrosive substances. The MPL-B640F-SJ72AA servo motor can be mounted with the shaft facing down, horizontally, or up. The mounting position of the shaft affects the servo motor’s international protection rating. For example, when the shaft is facing down, the MPL-B640F-SJ72AA servo motor has an IP 53 protection rating while it has an IP 51 and an IP 50 protection rating when the shaft is facing horizontally and up, respectively.