Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley MPL Servo Motors MPL-B680B-M-X141

Product image is representative; revision or series may vary. Contact us to request a specific version.

MPL-B680B-M-X141

|
Need a Specific Revision?

The MPL-B680B-M-X141 from Allen Bradley is designed as a low-inertia servo motor, operating at a supply voltage of 400 VAC. With a rated rotational speed of 1000 rpm, this motor caters to precise motion control requirements in various applications.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for MPL-B680B-M-X141

ManufacturerAllen Bradley
Product TypeLow-inertia Servo Motor
Product LineMPL Servo Motors
Part NumberMPL-B680B-M-X141
Weight32.00 lbs (14.51 kg)
Supply Voltage400 VAC
Flange Size (IEC)215 mm
Magnet Stack Length8 in (203.2 mm)
Rated Speed1000 rpm
Feedback EncoderMulti-turn, high-res
Operating Temperature0–40 °C (32–104 °F)
Ingress RatingIP68 (with seals)
Shaft SealNitrile
Radial Load Capacity230 kg @1000 rpm
Axial Load Capacity77 kg (full radial); 99 kg (none)
Integrated BrakeNone
Shaft Key Size12 × 8 × 79 mm
Connector TypesM23 (encoder); M40 (power)
Faceplate Bolt Torque17–45 N·m
Request a Repair

With the part number MPL-B680B-M-X141, this low-inertia servo motor from the MPL Servo Motors series by Allen Bradley provides reliable performance across a broad range of operational contexts. Operating at 400 VAC, this motor excels with a rated speed of 1000 revolutions per minute, ensuring quick and efficient motion capabilities. The servo motor's dimensions include a flange size measured at 215 mm, accommodating various mounting configurations.

Measuring 8 inches (203.2 mm) in magnet stack length, the motor is engineered for efficiency and performance, maintaining a radial load capacity of up to 230 kg while rotating at 1000 rpm. The axial load capacity is also impressive, rated at 77 kg for full radial loads and up to 99 kg for loads aligned axially.

The versatile operation temperature range extends from 0 to 40 °C, suitable for many environments, while the integration of an IP68 ingress rating with seals provides effective protection against dust and moisture ingress. The motor includes a nitrile shaft seal, ensuring durability and reliability in demanding applications.

Incorporating a multi-turn, high-resolution feedback encoder enhances performance tracking and ensures precision in motion control tasks. This motor lacks an integrated brake, enabling it to maintain simplicity in design while meeting the necessary operational specifications. The shaft key size measures 12 × 8 × 79 mm, providing compatibility with various applications. Additionally, the motor's M23 and M40 connectors ensure straightforward electrical connections for encoder and power inputs, respectively. The installation of the faceplate requires a torque specification between 17 to 45 N·m for secure mounting, underscoring the robust design of this advanced servo motor.