Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley MPL Servo Motors MPL-B680D-SJ74AA

Product image is representative; revision or series may vary. Contact us to request a specific version.

MPL-B680D-SJ74AA

|
Need a Specific Revision?

This Allen Bradley 215 mm MPL AC servo is a 2000 RPM rated low inertia servo motor. This MPL Series brushless motor has a shaft key, but no shaft seal installed on the servo to allow for connecting to this motor. This MP low inertia AC servo comes with a braking feature installed in case braking is required. In addition, it has a magnetic stack length of 8 inch, a high-resolution single turn feedback included on the servo, and can be connected by DIN style (circular) cable connections that are built onto this brushless servo motor. This MPL Series synchronous servo also utilizes 230V AC power to run.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for MPL-B680D-SJ74AA

ManufacturerAllen Bradley
CategoryMotors
Product LineMPL Servo Motors
Part NumberMPL-B680D-SJ74AA
Weight32.00 lbs (14.51 kg)
SeriesPremium permanent magnet rotary servo motor
Series TypeLow-inertia
Voltage Class400 Volts AC
Frame Size215 millimeters
Magnetic Stack Length8 inches
Rated Speed2000 rpm
FeedbackSingle-turn high-resolution encoder
Shaft Key/SealShaft key/no shaft seal
ConnectorsCircular DIN, right angle, 180 degrees rotatable
Brake24 Volts DC brake
Mounting FlangeIEC metric
Factory Designated OptionsStandard
View as PDF
Request a Repair

The MPL-B680D-SJ74AA servo motor is a low-inertia servo motor that has been designed by Allen-Bradley. The MPL-B680D-SJ74AA servo motor features an 8-inch magnetic stack length and it is classified as a 400 Volts Allen-Bradley servo motor. The rated motor speed for the MPL-B680D-SJ74AA servo motor is 2000 revolutions per minute while the MPL-B680D-SJ74AA servo motor features A single-turn high-resolution feedback encoder. The MPL-B680D-SJ74AA servo motor enclosure has a shaft key and no shaft seal and the low-inertia servo motor also features the circular DIN right angle 180 degrees rotatable connector. It has the standard factory-designated control options and it comes with the IEC metric mounting flange.

The MPL-B680D-SJ74AA servo motor comes with the mounting pilot that is used for the alignment of the unit on the machine. Note that when installing the unit, the manufacturer recommends the use of stainless steel fasteners. The installation procedure should be compliant with the local electrical regulations, to ensure the promotion of electromagnetic compatibility and safety. Before the MPL-B680D-SJ74AA servo motor is connected to the power, ensure that all of the proper installation procedures have been followed. This is important in order to ensure that there no risk of injury, or loss of life. The MPL-B680D-SJ74AA servo motor features feedback housing and brake connectors that can be rotated, allowing the connector to face downwards when the motor has been installed in a vertical application. The Allen-Bradley servo motors use connectors that are designed to be rotated into a fixed position when they are being installed. The MPL-B680D-SJ74AA servo motor should be protected from electromagnetic noise because this might adversely impact the performance of the motor.

Revision Part #Also known as
MPL-B680D-SJ74AA Ser AMPL-B680D-SJ74AA/A, Series A, Rev A
Don't see your particular revision? Contact us now.