MPL-B680F-MJ22AA

The MPL-B680F-MJ22AA servo motor is an AC servo motor made by Allen-Bradley for high levels of continuous power output. It is able to provide quick acceleration and make machines perform better, more reliablity, and more efficiently. This motor belongs to the Allen-Bradley MPL low-inertia servo motor series that is manufactured to be used with Allen-Bradley Kinetix 2000, Kinetix 6000, and ULTRA 3000 AC servo drives. This is why the MPL-B680F-MJ22AA servo motor has an absolute feedback encoder installed in the factory. This encoder is a multi-turn type of encoder that is capable of withstanding serious shocks and levels of vibration. The MPL-B680F-MJ22AA servo motor comes with 215-millimeter frame size, 8 inches of stack length, and an IEC metric mounting flange.

The Allen-Bradley MPL-B680F-MJ22AA servo motor has rated output power of 7.5 kilowatts, a continuous stall torque of 60 N-m, and a peak stall torque of 108.5 N-m, and its weight is 89 pounds (40.4 kilograms). It is recommended to operate this device at temperatures between 0 and 40 degrees Celsius (32 to 104 degrees Fahrenheit). The MPL-B680F-MJ22AA servo motor has the ability to maintain its network identity with built-in memory. The device has a rotor magnet and stator windings design that improves flux density and delivers more power in smaller motor size. It is supplied with power over circular bayonet (shaft-facing) connectors with a voltage rating of 460 Volts AC. The nominal speed of the unit is 3000 rpm. Mechanical connections to this servo motor are established over couplings and pulleys that are rigidly coupled with the motor shaft. These connections must be properly aligned, otherwise, it will not be possible to achieve the expected 20,000 hours of motor bearing life.