MPL-B680F-MJ72AA

A product of Allen-Bradley/Rockwell Automation, the MPL-B680F-MJ72AA servo motor is an MP-series low-inertia servo motor. The MPL-B680F-MJ72AA servo motor features the IEC metric mounting flange and a frame size of 215 millimeters. The unit also comes with an 8-inch magnetic stack length while the rated motor speed is 3000 revolutions per minute. The Allen-Bradley servo motors like the MPL-B680F-MJ72AA servo motor feature the circular DIN right-angle 180 degrees rotatable connectors but no brakes. The servo motor features the standard factory designated options and it comes with 430 Volts AC voltage. The Allen-Bradley servo motors feature a shaft cap that should be removed before powering up the MPL-B680F-MJ72AA servo motor. Remove the protective cap by hand or a screwdriver. Using a hammer or other tools can cause damage to the motor shaft and should be avoided.

The MPL-B680F-MJ72AA servo motor is prone to electromagnetic interference, and this results in poor performance. To avoid the induction of the stray signals, consider isolating the power transformers. Alternatively, line filters can be installed on all of the AC input power lines. Another approach is to ensure that separate signal cables are used for the motor cabling and the power cabling. These cables should not be routed on the same duct to avoid electromagnetic interference. The relative ambient humidity range for the MPL-B680F-MJ72AA servo motor is 5% to 95%, and this Allen-Bradley servo motor should be operated in a clean and dry environment. To ensure that the drive does not come into contact with moisture and other foreign substances, use a shield on the outer cover of the drive.