MPL-B680F-SJ72AA

The MPL-B680F-SJ72AA is a Kinetix MPL servo motor. This servo motor is essentially a Brushless AC synchronous servo motor that is installed with high-energy rare-earth magnets. It exhibits low rotor inertia output and supports Smart Motor Technology. It is typically used in motion and position control requirements, commonly found in automated manufacturing and assembly applications. The MPL-B680F-SJ72AA is manufactured by Allen-Bradley and is specifically compatible with a variety of Kinetix Servo Drive particularly, Kinetix 5500, Kinetix 5700, Kinetix 6200/6500, Kinetix 6000, Kinetix 300/350, Kinetix 2000, Kinetix 7000 servo drives. This servomotor mainly features a 215 mm frame size, 203.2 mm (8.0 in.) Magnet stack length, with a rated speed of 2000 RPM and a maximum speed of 3000 RPM. It has a built-in 1024 sin/cos, absolute single-turn encoder device that supports Hiperface protocol. This device functions as the position feedback for accurate control. It uses a keyed shaft and requires a Circular SpeedTec DIN connector, in right angle orientation that is rotatable up to 180°. The MPL-B680F-SJ72AA is compatible for use in a variety of applications such as Packaging, Converting, Material handling, Electronic Assembly, and Automotive applications. It comes with an IP50 environmental rating which can be upgraded up to IP66 with the use of an appropriate shaft seal and environmentally sealed cables. A compatible shaft seal for use with this servo motor is the MPL-SSN-A6B6. The MPL-B680F-SJ72AA has continuous stall Torque of 60.0 N-m (531 lb-in), peak stall torque of 108.5 N-m (960 lb-in) and 7.5 kW motor rated output The motor’s output inertia is 0.00775 kg-m2 () (0.0685 lb-in-s2).

Featuring a rated motor speed of 3000 revolutions per minute, the MPL-B680F-SJ72AA servo motor is an Allen-Bradley MPL series servo motor. The servo motor comes with a 215 millimeters frame size and it is featured under the 400 Volts AC voltage class. The Allen-Bradley MPL-B680F-SJ72AA servo motor features an 8-inch magnetic stack length. It features the IEC metric mounting flange and it is built featuring the standard factory designated control options. Note that exposure of this Allen-Bradley servo motor to the electrical noise could result in poor motor performance through the induction of the stray signals and of HMI. To prevent exposure to the EMI, isolate the power transformers or install line filters on all of the AC input power lines. Alternatively, the users can separate the signal cables from the main motor cables and the power wiring. The Allen-Bradley servo motors like the MPL-B680F-SJ72AA servo motor support a broad torque range with all MPL series servo motors. The unit also comes with the improved winding insulation material for ensuring enhanced thermal management as well as enhanced heat transfer for delivering a high level of performance. The unit also comes with the shaft key without a shaft seal or brake option. The Allen-Bradley servo motor also comes with the smart motor technology and an onboard memory unit that helps to ensure that the servo motor has the ability to retain the motor identity. The recommended storage environment is a noncorrosive environment with an ambient storage temperature between -30 and 70 degrees Celsius. The Allen-Bradley MPL-B680F-SJ72AA servo motor should also have an ambient operating temperature range of 0 to 40 degrees Celsius.