MPL-B860D-SJ24AA

The Allen-Bradley MPL-B860D-SJ24AA AC servo motor is a brushless AC servo motor from the MPL series of servo motors that is designed to meet the tough requirements of a high-performance motion system. The MPL series servo motors feature advanced winding technology that offers up to 40% higher torque relative to the motor size than ordinary motors in their class do, and they are fitted with rare earth magnets that offer quicker acceleration. The MPL-B860D-SJ24AA servo motor has a 3-phase voltage rating of 400 Volts AC, with 12.5 kilowatts of motor power, and it has a base motor speed of 2000 rpm. This servo motor, like all MPL servo motors, is capable of operating at factory specified shaft loads (both radial and axial loads), and it has a peak torque rating of 1350 pounds on an inch.

The MPL-B860D-SJ24AA servo motor has a spring-set 24 Volts DC holding brake suited for applications that require fail-safe braking, and it comes with a single-turn high-resolution encoder that provides absolute positioning feedback. The MPL-B860D-SJ24AA servo motor has an onboard motor memory that stores motor profiles, and a communication link that automatically reports the motor profiles to a system upon startup for lower commissioning time. The MPL-B860D-SJ24AA servo motor has a circular bayonet connector facing the shaft and a shaft key for secure and rigid connection. It has an aluminum housing and an IP 50 environmental rating. The MPL-B860D-SJ24AA servo motor has a large frame size (265 millimeters), with a 6-inch magnet stacking length. The MPL-B860D-SJ24AA servo motor has a rated operating range between 0 and 40 degrees Celsius, and it has a designated storage temperature range of -30 to 70 degrees Celsius. The MPL-B860D-SJ24AA servo motor weighs approximately 57.3 kilograms (126 pounds), and it is designed to meet the UL, CE, and CSA standards.