MPL-B880C-MJ74AA

The MPL-B880C-MJ74AA servo motor is an MPL series low-inertia rotary servo motor manufactured by Allen-Bradley. This motor delivers 1500 revolutions per minute with an output power rating of 12.6 kilowatts. Its rotor inertia rating is 0.0224 kg-m2, its stall torque is rated at 110 N-m, and its continuous stall current is 47.5 Amps. This servo motor is equipped with the standard factory designated control options to meet the requirements of high-performance motion systems. Its feedback device is a multi-turn high-resolution encoder and it also features a 24 Volts DC brake. The connectors on the MPL-B880C-MJ74AA servo motor are SpeedTEC DIN right-angle connectors, which are designed to provide a quick one-quarter turn connection, allowing for easy yet secure wiring. The connectors can be rotated within180 degrees so it supports different wiring orientations and the motor’s frame size is 265 millimeters.

The MPL-B880C-MJ74AA servo motor features a shaft key for fastening couplings to the motor shaft. Taken together, the compact design of this servo motor, the advanced technology implemented in its winding, and its high-energy rare-earth magnets combine to produce the levels of torque and acceleration that are required to move the toughest loads. All Allen-Bradley MPL series rotary servo motors, including the MPL-B880C-MJ74AA servo motor, support vertical and horizontal mounting orientations. No shaft seal is installed on this servo motor, so when it is mounted horizontally, its environmental protection rating is IP 51. When the servo motor is mounted vertically with its shaft facing up, this gives it an environmental protection rating IP 53. If the shaft is facing down, then its environmental protection rating is IP 50. However, when a shaft seal kit is properly installed on this servo motor, it has an IP 66 protection rating.