Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley MPL Servo Motors MPL-B980B-SJ22AA

Product image is representative; revision or series may vary. Contact us to request a specific version.

MPL-B980B-SJ22AA

|
Need a Specific Revision?

The MPL-B980B-SJ22AA servo motor is a rotary servo motor with low inertia and a motor frame size of 300 millimeters. The motor is intended for use on 400-Volt power sources and it has a magnet stack length of 8 inches. The MPL-B980B-SJ22AA servo motor is made by Allen-Bradley/Rockwell Automation in the MPL series and it has a rated speed of 1000 revolutions per minute.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for MPL-B980B-SJ22AA

ManufacturerAllen Bradley
CategoryMotors
Product LineMPL Servo Motors
Part NumberMPL-B980B-SJ22AA
Weight32.00 lbs (14.51 kg)
Motor TypePremium Permanent-Magnet Rotary Servo Motor
Inertia TypeLow Inertia
Voltage Class400 Volts
Frame Size (IEC 72-1 Flange Number)300 millimeters
Magnet Stack Length8 Inches
Rated Speed1000 Revolutions per Minute
FeedbackSingle-Turn High-Resolution Encoder
Shaft Key/SealShaft Key, No Shaft Seal
ConnectorsCircular Bayonet, Facing Shaft
Brake OptionNone
Mounting FlangeIEC Metric
Factory Designated OptionsStandard
Request a Repair

The product code MPL-B980B-SJ22AA represents an Allen-Bradley/Rockwell Automation MPL series servo motor with low rotor inertia. The motor is made from high-quality materials and it includes permanent magnets that support high energy levels for industrial applications. The motor provides high output levels and it has a high torque to size ratio. This compact motor uses a Hiperface or Stegmann encoder protocol and it comes with a single-turn high-resolution encoder option as its feedback device. The MPL-B980B-SJ22AA servo motor is a brushless AC synchronous servo motor and the frame size of the motor is 300 millimeters. The servo motor has an enclosure protection rating of IP 50 and it meets the CE, UL, and CSA standards. This CE-marked and UL recognized servo motor uses a bayonet-style right-angle connector and a shaft-end threaded hole.

The Allen-Bradley/Rockwell Automation MPL-B980B-SJ22AA low-inertia permanent magnet servo motor is part of the 400 Volts voltage class within the Allen-Bradley MPL Servo Motors series and it uses an IEC metric type of mounting flange for mounting. Additionally, the MPL-B980B-SJ22AA servo motor has a maximum rated motor speed of 1000 revolutions per minute and a magnet stack length of 8 inches for its permanent magnets. This servo motor includes a shaft key but it does not have a built-in shaft seal. The MPL-B980B-SJ22AA servo motor is built with Smart Motor Technology and it provides multiple functions that will contribute to a better overall performance for a complete industrial motion control system. This motor does not have a built-in holding brake.