MPL-B980D-MJ22AA

The MPL-B980D-MJ22AA drive is an Allen-Bradley low-inertia servo motor. The premium permanent rotary servo motor features a voltage rating of 400 Volts AC and it is in the B voltage class. The unit has a frame size of 300 millimeters and a rated motor speed of 2000 revolutions per minute. The MPL-B980D-MJ22AA servo motor has a magnetic stack length of 8 inches and a multi-turn high-resolution encoder. The MPL-B980D-MJ22AA servo motor features a shaft key with no shaft seal enclosure. It is designed as a standard unit with no brake. The low-inertia servo motors feature a protective cap that is installed on the motor shaft. When installing the unit, remove the protective cap from the motor shaft by using a screwdriver. Avoid using a hammer to remove the protective cap because this will cause serious damage to the motor shaft. When it comes to the maintenance of the MPL-B980D-MJ22AA servo motor, a proper installation design, and a maintenance plan will help to prolong the life of the servo motor.

Provide a drip loop in each cable that will carry liquids away from the connections running to the Allen-Bradley motor. As part of the installation design, the MPL-B980D-MJ22AA servo motor should have a motor housing wherever this is possible. The housing is also meant to provide protection to the drive connections that might become contaminated by the foreign matter of liquids. The operating ambient temperature range for the MPL-B980D-MJ22AA servo motor is from 0 to 40 degrees Celsius while the unit should be stored at a temperature range of -30 to 70 degrees Celsius when it is not in use. Store the MPL-B980D-MJ22AA servo motor in a noncorrosive environment with a relative humidity range of 5 to 95%, non-condensing.