MPL-B980E-MJ72AA

The Allen-Bradley/Rockwell Automation MPL-B980E-MJ72AA servo motor is a 460 Volts AC servo motor. It has a multi-turn high-resolution feedback encoder that helps in positioning the motor. The MPL-B980E-MJ72AA servo motor, like other motors in the MP-series low-inertia motor series from Allen-Bradley, has a high level of performance to meet the demanding requirements of high-performance motion systems that are used on the industrial floor. The motor supports mounting dimensions that meet the IEC72-1 standard. The MPL-B980E-MJ72AA servo motor, like other motors in the same family, is compatible with the Allen-Bradley Kinetix 5500, Kinetix 6200/6500, Kinetix 6000, Kinetix 300/350, Kinetix 2000, Kinetix 7000, and Ultra 3000 series servo drives. Note that since the MPL-B980E-MJ72AA servo motor supports the Hiperface protocol on its encoder, it will require the Allen-Bradley 2198-H2DCK Hiperface-to-DSL converter when using the Kinetix 5500 servo drive.

The MPL-B980E-MJ72AA servo motor can be used in typical applications such as automotive, metal forming, packaging, converting, material forming, and electronics assembly applications. The MPL-B980E-MJ72AA servo motor has a rated speed of 2500 revolutions per minute and it has the standard factory designated control options. For the proper functioning of the motor, the electromagnetic compatibility level should be improved by observing the correct cable routing procedure and careful cable construction. When installing the cables, the cable lengths should be kept to the required minimum length and cables carrying sensitive signals such serial, I/O, and encoder signals should be routed away from the input power wiring and the motor power wiring. To prevent electromagnetic interference, the encoder cable shield should be grounded at both ends. Additionally, the signal wire pairs should be twisted to reduce EMI interference.