MPS-A4540F-MJ54DA

The MPS-A4540F-MJ54DA is a Kinetix Servo motor from the MPS series of servo motors designed for a washdown environment. This servomotor mainly features a stainless-steel frame that is specifically designed for use in hygienic environments with high pressure and highly caustic washdown environments. Similar to the other MP series motors, the MPS-A4540F-MJ54DA has low-inertia output however, it comes with an environmental rating of IP66 / IP67. The MPS-A4540F-MJ54DA is compatible with a variety of Kinetix Servo drives including Kinetix 5500, Kinetix 5700, Kinetix 6200/6500, Kinetix 6000, Kinetix 300/350, and Kinetix 2000 servo drives. Being a food-grade servo motor, this motor complies with the sanitation requirement of food applications therefore, it can be used in meat and poultry; Food slicing and filling; Raw food handling; Processing; Life science, and Consumer products. The MPS-A4540F-MJ54DA catalog number depicts that this servo motor has a 130 mm frame size, 101.6 mm (4.0 in.) Magnet stack length and rated speed of 3000 RPM. The integrated feedback device of the motor is a 1024 sin/cos, an absolute multi-turn encoder that supports Hiperface protocol and uses an IP66 / 67 keyed shaft and uses Circular SpeedTec DIN connector, right angle, 180° rotatable. The MPS-A4540F-MJ54DA is a 200V class servo motor that is essentially an AC Brushless synchronous motor. It has a rated and maximum speed of 300 RPM and 1.4 kW motor rated output. The motor’s continuous stall torque is 3.6 N-m (32 lb-in); Peak Stall Torque 11.1 N-m (98 lb-in) and Inertia output 0.00012 kg-m2 () (0.0010 lb-in-s2). This motor approximately weighs 13 kg (28.5 lb).

The MPS-A4540F-MJ54DA servo motor from Allen-Bradley is a 3000 RPM rated stainless steel servo motor. It is an MPS Series motor rated for 200 Volts AC input voltage. It is compatible with the Allen-Bradley Kinetix 5500, Kinetix 200, and Ultra 3000 series drives. The stainless steel MPS Series drives are designed for applications including food, brewing, beverage, and dairy applications. The features available on the MPS-A4540F-MJ54DA servo motor include a 1024 sin/cos absolute multi-turn encoder (the Hiperface protocol), a 24 Volts DC brake, an IEC metric flange with tapped mounting holes (type FT holes), cables with circular DIN connectors, a 130 millimeters frame size, a 101.6 millimeters magnet stack length, IP 66, IP 67, or IP 69 rated enclosures, a shaft seal, a shaft key, and the standard factory control options. The multi-turn encoder provides high-resolution feedback within 4096 turns. The electromechanical design of the encoder does not require a battery. The shaft seals are made by using PTFE and a lubricant is provided to reduce wear. The replacement of the shaft seals is recommended after every 3 months and the period between replacements should not exceed 12 months in any case. Additional motor specifications for the MPS-A4540F-MJ54DA servo motor are 1.4 kilowatts of power output, continuous and maximum stall torque ratings of 8.1 N-m and 27.1 N-m, respectively, 0.00052 kg-m2 of rotor inertia. And it weighs 13 kilograms. The length of the motor, including the shaft, is 266 millimeters. The radial load force ratings at 500, 1000, 2000, and 3000 RPM are 140, 111, 89, and 77 kilograms, respectively. The recommended storage and operating temperature ranges for the MPS-A4540F-MJ54DA servo motor are -122 to 158 degrees Fahrenheit and 32 to 104 degrees Fahrenheit, respectively.