Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley PowerMonitor 1000 1408-TR1A-ENT

Product image is representative; revision or series may vary. Contact us to request a specific version.

1408-TR1A-ENT

|
Need a Specific Revision?

The 1408-TR1A-ENT transducer device is a PowerMonitor 1000 system transducer from Allen-Bradley. It is a voltage and current transducer which works with 120 to 240 Volts AC or 125 to 250 Volts DC control power. The 1408-TR1A-ENT transducer comes with an integrated Ethernet port.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1408-TR1A-ENT

ManufacturerAllen Bradley
Product typeVoltage and current transducer
Product LinePowerMonitor 1000
Part Number1408-TR1A-ENT
Weight3.00 lbs (1.36 kg)
Control power120 / 240 Volts AC, 125-250 Volts DC
AC control power range85 to 264 Volts AC
DC control power range125 to 250 Volts DC
Maximum control power4 VA
CommunicationEthernet
Operating temperature14 to 140 degrees Fahrenheit
Wire size0.34 to 2.5 mm2
Maximum wire torquq7 lb-in
Storage temperature–40 and 185 degrees Fahrenheit
UPC10662074663566
Request a Repair

The 1408-TR1A-ENT transducer is a PowerMonitor 1000 transducer from Allen-Bradley. It is a voltage and current transducer which works with 120 to 240 Volts AC or 125 to 250 Volts DC control power. The 1408-TR1A-ENT transducer comes with an integrated Ethernet port. Devices from the PowerMonitor product line are intended for applications that require power and energy metering such as industrial control panels and distribution centers. Voltage and current levels are measured and communicated to applications such as RSPowerPlus as RSPower applications. The single-phase or 3-phase consumer electrical system connects to the power monitor. This connection can be direct or it can be through a transformer.

The maximum input power to the 1408-TR1A-ENT transducer can be 4 VA. The range of control power input voltages is from 85 to 264 Volts AC and 125 to 250 Volts DC. The dielectric withstand threshold for control power on the 1408-TR1A-ENT transducer is 2500 Volts, and the threshold for the current and voltage inputs is 2500 Volts. The working temperature range for the 1408-TR1A-ENT transducer is 14 to 140 degrees Fahrenheit. For device storage, Allen-Bradley recommends an environment that is free of corrosive elements such as dust and vapors with a temperature range between –40 and 185 degrees Fahrenheit. Only copper wire should be used for terminations on the 1408-TR1A-ENT transducer. The size of the copper wire should be between 0.34 to 2.5 mm2. The torque on the wire should not exceed 7 pounds on an inch.