TL-A110P-HJ34AA

The TL-A110P-HJ34AA is a rotary servo motor with low inertia that is produced and designed by Allen-Bradley/Rockwell Automation. The TL Series servo motors are compact, and these CE-marked products are an excellent choice for machine designers. The servo motors from this series present an optimum solution for various applications where there is a need for powerful and high-performance motors which are packed in a small frame. The TL-A110P-HJ34AA rotary servo motor is enclosed in an IP65 enclosure with a shaft key and it has a frame size of 46 millimeters or NEMA 17. This low-inertia servo motor has a 10-magnet stack length and it includes a standard metric factory-installed option. Besides that, the TL-A110P-HJ34AA incorporates a 24 Volts DC brake and it has a rated speed of 5000 RPM. The motor operates through 200 Volts power source and it features 2000 lines per revolution feedback with an included incremental encoder. The connectors for this servo motor should be used with cables with rectangular connectors that are 300 millimeters in length.

The TL/TLY frame with A1xx mark has a heatsink with approximate dimensions of 203 millimeters (8 inches) in height, 203 millimeters (8 inches) in width, and 6.4 millimeters (0.25 inches) in depth. The ambient temperature of the heatsink of this servo motor is 40 degrees Celsius (104 degrees Fahrenheit). In regard to the installation of the TL-A110P-HJ34AA motor, the users should install the motor where the specified clearances are maintained and not in areas where the airflow is restricted. Also, motors like this should be separated from other devices that generate heat while operating. In addition to that, all motors with the TL Series mark come with a mounting pilot for the proper alignment of the motor on a machine. For mounting the motor, the users should use stainless steel fasteners. The TL-A110P-HJ34AA servo motor is manufactured according to all of the relevant standards and regulations that promote electromagnetic compatibility and safety.