TL-A220P-HJ32AA

The TL-A220P-HJ32AA is a standard Allen-Bradley manufactured device. It comes from the low-inertia TL family. It is a 230 Volts AC servo motor device. The device comes enclosed in a keyed shaft with a 70-millimeter bolt circle frame mount which is NEMA 23 sized. It is also rated IP65, which means that it is waterproof against low-pressure water jets. It has a rotating body and it can turn for a maximum angle of 325 degrees. It can be mounted using an IEC metric mounting flange. The TL-A220P-HJ32AA has low inertia and it comes with a rated speed of 5000 RPM. The motor lacks a shaft seal. It comes with a rated temperature in the range of 0 to 40 degrees Celsius. The shaft key of this motor device is made up of carbon steel.

The TL-A220P-HJ32AA has a stack length that is equal to that of 20 magnet stacks. A holding brake is present with a 24 Volts DC power supply. It has enhanced features to provide the overall running information of the motor. The feedback system is integrated into this motor. It has an enhanced feedback system with an incremental encoder which provides feedback for 2000 lines/revolution. It comes with circular cable connectors that are 1 meter long. The device weighs around 8 pounds and is a 3-phase device. The TL-A220P-HJ32AA is a perfect and cost-effective solution for delivering maximum performance and a high level of scalability in industry and factory environments. It has also passed various standard certifications like the C-Tick, CE, and UL standards. During the installation of this motor, the environment should be clean and any devices that dissipate heat should not be present in that area. Also, the environment should be free from electromechanical noise and other disturbances. A non-corrosive environment is needed for the installation of this motor device.