TL-A230P-BJ32AA

The Allen-Bradley TL-A230P-BJ32AA TL-Series Servo Motor is a 3-phase 8-pole WYE winding servo motor from the TL Series of low-inertia high-performance servo motors that are designed for most high-performance motion control systems. This motor features a high torque density performance ratio in a very compact package and it is designed with a high-energy neodymium-iron-boron permanent magnet rotor that is suitable for enhanced motor performance. The TL-A230P-BJ32AA has 230 Volts AC of operating voltage, with an output power rating of kilowatts, and a continuous current rating of 5.5 Amps, and a peak rating of 15.5 Amps. It has a base motor speed of 5000 RPM at 230 Volts AC input and a stall torque rating of 1.3 N-m which peaks at 3.05 N-m. The TL-A230P-BJ32AA has 1.71 to 2.09 Ohms winding resistance at 30 degrees Celsius, with 8.4 milli-Henry of winding inductance, and it has 15 minutes of the thermal time constant at 40 degrees Celsius.

Similar to every TL series motor, the TL-A230P-BJ32AA has up to 20,000 hours of bearing fatigue life, and it can operate with an 18-kilogram radial load at 5000 RPM. It features a 17-bit multi-turn high-resolution encoder with a battery backup, serial communication capability, and an integral memory which provides absolute position feedback, and the memory and the serial COM interface provide storage and transmission of motor identity. The TL-A230P-BJ32AA has a metric-rated 25-millimeter frame size, with a 30-millimeter magnetic stack length, and it is designed with a 1-meter connecting cable with a rectangular connector. It has an IP65 standard dust and water resistance enclosure with a shaft seal, and it supports metric flange mounting. The TL-A230P-BJ32AA has a designated ambient temperature range of 0 to 40 degrees Celsius, with a non-condensing 20 to 85% relative humidity range, and it can be stored within a -10 to 85 degrees Celsius temperature range.