Product image is representative; revision or series may vary. Contact us to request a specific version.
TL-A230P-BJ34AA
The TL-A230P-BJ34AA servo motor uses powerful permanent magnets that are made from rare-earth metals to operate with as little inertia as possible. These magnets are installed inside the servo motor in a stack that is 3 inches long. The TL-A230P-BJ34AA low-inertia servo motor’s voltage rating is 230 Volts AC, its rated speed is 5000 RPM, and it is equipped with a 24 Volts DC brake. This motor is protected by an IP 65 rated enclosure and a shaft key, but it does not come with a shaft seal. The TL-A230P-BJ34AA low-inertia servo motor uses a battery-backed type of absolute multi-turn encoder for feedback.
-
We sell industrial automation parts backed by our free 2-Year DO Supply Warranty.
-
Same-day domestic and fast international shipping with UPS, FedEx, DHL, and more.
-
AMEX, Visa, MasterCard, Discover, wire transfer, net terms, and more.
-
Repairs and exchanges are available for all automation products.
- Reseller Options
Drop shipping, blind shipping, and account shipping with no extra fees.
Technical specifications for TL-A230P-BJ34AA
| Manufacturer | Allen Bradley |
|---|---|
| Product Type | Low-Inertia Servo Motor |
| Product Line | TLY and TL Servo Motors |
| Part Number | TL-A230P-BJ34AA |
| Weight | 4.00 lbs (1.81 kg) |
| Voltage | 200 Volts AC |
| Frame Size | 70 millimeters or NEMA 23 |
| Magnet Stack Length | 30 |
| Rated Speed | 5000 RPM |
| Feedback | Multi-turn (1), 17-bit (131,072) counts/revolution, absolute, battery-backed encoder (serial protocol) |
| Enclosure/Shaft Key | IP65/Shaft Key |
| Connectors | Cables with rectangular connectors, 300 mm |
| Factory Options | Standard Metric |
| Brake | 24 Volts DC |
The Allen-Bradley TL-A230P-BJ34AA Low-Inertia Servo Motor is a high-performance servo motor from the TL Series series of servo motors with high load-to-motor inertia ratios and with a 24 Volts DC braking option that is designed to provide motor solutions to a wide range of motion control systems. It features state-of-the-art high-energy neodymium-iron-boron magnets with built-in motor memory which retains motor profile, and it is built to be compatible with Allen-Bradley Kinetix 3 servo drives. The TL-A230P-BJ34AA has an operating voltage class of 200 Volts AC with a nominal voltage rating of 230 Volts AC, and a net power output of 0.32 kilowatts. It has a continuous stall current rating of 4.95 Amps, with a peak stall current of 15.5 Amps, and it has a base rotor speed of 5000 RPM at 200 Volts AC. The TL-A230P-BJ34AA is designed to provide 1.16 N-m of stall torque at 40 degrees Celsius, and a peak stall value of 3.05 N-m. It offers 0.000044 kilograms per meter of square rotor inertia, with 0.02 N-m of friction torque, and it has a winding resistance of 1.7 to 2.1 Ohms.
The TL-A230P-BJ34AA is designed to provide 20,000 hours of bearing fatigue life, and it is capable of operating at 5000 RPM of maximum rotor speed with a 40-pound maximum radial shaft load. It has a battery-backed 17-bit high-resolution encoder option, which provides high-performance multi-turn absolute position feedback for enhanced motor performance. It also has a spring-set type 24 Volts DC holding brake option with a 1.24 N-m holding brake torque that is designed to provide smooth braking for smooth operation. The TL-A230P-BJ34AA comes in a liquid and dust-resistant IP65 rated enclosure without a shaft seal, and it has a rectangular type connector cable for simple wiring. It has a 70-millimeter standard metric rated frame size, with a 30-millimeter magnetic stack length, and it supports a metric flange mounting option. The TL-A230P-BJ34AA has an operating temperature range of 0 to 40 degrees Celsius (32 to 104 degrees Fahrenheit) and a 20 to 85% non-condensing relative humidity range. The TL-A230P-BJ34AA has a net shipping weight of 2.1 kilograms (brake-inclusive), and it is CE certified.
| Revision Part # | Also known as | |
|---|---|---|
| TL-A230P-BJ34AA Ser A | TL-A230P-BJ34AA/A, Series A, Rev A | |
| TL-A230P-BJ34AA Ser B | TL-A230P-BJ34AA/B, Series B, Rev B | |
| Don't see your particular revision? Contact us now. | ||
- TL-A230P-8J34AA
- TL-A230P-BJ3AAA
- TL-A23OP-8J3AAA
- TL-A23OP-BJ34AA
- TLA230P8J34AA
- TLA230PBJ34AA
- TLA230PBJ3AAA
- TLA23OP8J3AAA
- TLA23OPBJ34AA
The Allen-Bradley TL-A230P-BJ34AA Low-inertia Servo Motor operates with a 200V Voltage and a 5000 rpm Rated Speed. It also has a 70 mm or NEMA 23 Frame Size and Magnet Stack Length of 30.