Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley TLY and TL Servo Motors TL-A2530P-HJ34AA

Product image is representative; revision or series may vary. Contact us to request a specific version.

TL-A2530P-HJ34AA

|
Need a Specific Revision?

The TL-A2530P-HJ34AA servo motor is an Allen-Bradley/Rockwell Automation TLY and TL series servo motor. It is designed to operate with low levels of inertia and it uses powerful magnets to achieve its low levels of inertia. The TL-A2530P-HJ34AA servo motor is rated at 230 Volts AC of nominal voltage and at 5000 RPM of maximum operating speed. Its 24 Volts DC holding brake can hold its shaft at a standstill (at 0 RPM) until it reaches the rated brake holding torque level. The TL-A2530P-HJ34AA servo motor comes with a 2000-line incremental encoder for providing feedback.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for TL-A2530P-HJ34AA

ManufacturerAllen Bradley
Product TypeLow-Inertia Servo Motor
Product LineTLY and TL Servo Motors
Part NumberTL-A2530P-HJ34AA
Weight7.00 lbs (3.18 kg)
Voltage200 Volts AC
Frame Size90 millimeters or NEMA 34
Magnet Stack Length30
Rated Speed5000 RPM
Feedback2000 lines/revolution, incremental encoder
Enclosure/Shaft KeyIP65/Shaft Key
ConnectorsCables with rectangular connectors, 300 mm
Factory OptionsStandard Metric
Brake24 Volts DC
View as PDF
Request a Repair

The Allen-Bradley TL-A2530P-HJ34AA AC Servo Motor is a servo motor in the TL Series of low-inertia servo motors that is designed to provide high-performance motor solutions to a wide range of industrial motion control systems. It is compatible with the Kinetix 6000, 350/300, 2000 and Ultra 300 servo drives, and combined with its space-saving package, the TL-A2530P-HJ34AA provides users with all the added benefits of the Kinetix Integrated Motion System. It is designed for applications that need compact and low-inertia motor solutions like the semi-conductors, electronic assemblies, machine assemblies, and material handling applications. The TL-A2530P-HJ34AA has a 230 Volts AC nominal rating, with a 0.69 kilowatts total power output, and it has 5000 RPM of maximum motor speed. It is designed with high-energy neodymium-iron-boron permanent rotor magnets designed to meet the tough requirements of most motion control systems, and it also features a rectangular cable connector with smart motor technology.

The TL-A2530P-HJ34AA has 2000 lines per revolution of incremental encoder type, it is designed for low-cost applications, and a 24 Volts DC brake option which provides excellent braking option during operation. The TL-A2530P-HJ34AA has a stall torque rating of 23 pounds on an inch, which peaks at 46.0 pounds on an inch and it also has a continuous current rating of 10.0 Amps, which also peaks at 21.0 Amps. The TL-A2530P-HJ34AA has a standard bearing fatigue life rating of 20,000 hours, and it is designed to carry up to 62 pounds of shaft load (radial) at a 5000 RPM base motor speed. It has an IP65-rated dust and water-tight enclosure, with a 25-millimeter metric rated frame size and with a magnetic stack length of 30 millimeters. It has a designated operating temperature range of 0 to 40 degrees Celsius, within a 20 to 85% non-condensing and non-corrosive relative humidity condition, and it has a storage temperature range of -10 to 85 degrees Celsius. The TL-A2530P-HJ34AA has an approximate shipping weight of 2.0 kilograms (motor inclusive), and it is CE certified.

Revision Part #Also known as
TL-A2530P-HJ34AA Ser ATL-A2530P-HJ34AA/A, Series A, Rev A
Don't see your particular revision? Contact us now.