TL-A2540P-HJ32AA

The Allen-Bradley TL-A2540P-HJ32AA low-inertia servo motor belongs to the TL-series of servo motors. It has a voltage rating of 200 Volts, with a 90 millimeters or NEMA 34 mounting flange and a motor rated speed of 5000 RPM. It has incremental encoder feedback rating of 2000 lines per revolution as well as shaft key and an IP 65 enclosure. It also features a magnet stack length of 40, standard metric factory options, and rectangular connector cables of 300 millimeters. With the IP 65 enclosure type, the TL-A2540P-HJ32AA servo motor is dust-tight and protected from water. This motor is also designed to operate in a non-corrosive atmosphere, a storage temperature range of 14 to 185 degrees Fahrenheit, a relative humidity range of 20 to 85%, and an operating temperature range of 32 to 104 degrees Fahrenheit. It also comes with a carbon steel shaft and shaft key.

Among the accessories of the TL-series servo motors like the TL-A2540P-HJ32AA servo motor are motor cables, connector kits, shaft seal kits, and transition cables and transition plates. The transition plates allow the TL-A2540P-HJ32AA servo motor as well as other TL-series NEMA servo motors to replace the N-series motors. Transition cables transition between various cables of the N-series motors and servo motor cables with the TLY-series motors that have incremental encoders. These transition cables measure 20 inches or 500 millimeters. The TL-A2540P-HJ32AA servo motor and the entire TL-series (TLY) also features factory-made feedback encoders as well as power cables in standard cable lengths. Transition cables connect the servo motors that have TLY catalog numbers to N-Series feedback, brake, and power cables. These factory manufactured cables offer the appropriate shield terminations, thus reducing the possibility of EMI.