TL-A2540P-HJ32AN

The TL-A2540P-HJ32AN is a low-inertia servo motor manufactured by Allen-Bradley/Rockwell Automation as part of the TL-series of servo motors. It features a voltage rating of 200 Volts and it has a motor speed rating of 5000 RPM with a NEMA 34 or 90-millimeter frame size. This servo motor also comes with a magnet stack length of 40 and an incremental encoder feedback rating of 2000 lines per revolution. Also, it has an IP 65 enclosure type with a shaft key, and 300-millimeter rectangular connector cables. The shaft and the shaft key material in the Allen-Bradley TL-A2540P-HJ32AN low-inertia servo motor is carbon steel, and it has an operating temperature range of 0 to 40 degrees Celsius. This servo motor features an optional shaft seal with an IP 65 rating that protects it from dust as well as water jets from any direction. These TL-series servo motors, flying leads, and connectors are distinctly rated to provide environmental protection according to the ingress protection standard.

The TL-series motors, including the TL-A2540P-HJ32AN servo motor, are thoughtfully designed and properly maintained to help prolong the motor’s life. This is done by providing a drip loop in every cable to enhance the removal of water from the connections. Additionally, if design needs allow it, it is essential to provide shields for the protection of the motor housing, junctions, and shaft seals from fluids as well as from the contamination of products. The operators of the TL-A2540P-HJ32AN servo motor are also required to inspect the seals and the motor, in general, to see if there is wear or damage at an interval of 6 months and address the issue. Dusty or dry environments may cause the motor seal to wear out faster than oily or wet environments.