TLY-A110P-BJ62AA

The Allen-Bradley TLY-A110P-BJ62AA is a Kinetix Servo motor that belongs to the TLY series of compact, low-inertia output, and high Torque density servo motors. This servomotor supports smart motor technology and is compatible with use as actuating element of Kinetix Kinetix 5100, Kinetix 5300, Kinetix 6000, Kinetix 300 / 350, Kinetix 2000, and Ultra 3000 Servo drives. It is specifically designed for installation in Robotics, Material handling, X-Y tables, Specialty Machinery, Semiconductor manufacturing, Medical/laboratory equipment, Light packaging machines, Office machinery, and similar applications. Based on the servo motor’s catalog number, this motor is a 200 VAC class motor with a 45 mm frame size, magnet stack length of 10, rated speed of 5000 RPM, and maximum operating speed of 6000 RPM. The built-in feedback device is a 17-bit (131,072) counts/revolution, battery-backed absolute encoder supporting serial protocol which provides position feedback to the partner servo drive for accurate control. This servo motor has an IP65 rated housing, a keyed shaft however, a shaft seal is not included. The TLY-A110P-BJ62AA has a continuous stall torque of 0.096 Nm (0.85 lb-in.); peak stall torque of .020 Nm (1.75 lb-in.); motor rated output power of 0.041 kW and rotor inertia of 0.000001 kg-m2 (0.0000089 lb-in-s2). Appropriate shaft seal for use with this servo motor has a catalog number of TL-SSN-1. This shaft seal kit is subject to wear and tear therefore, regular servicing or re-application may be needed. Recommended servicing frequency is once every (3) months or not exceeding Twelve (12) months without a single maintenance activity conducted.

The TLY-A110P-BJ62AA is a low-inertia servo motor from Allen-Bradley. The motor belongs to the TL-Series of high-performance motors with a low inertia level. The TLY-A110P-BJ62AA, as with other motors in the same series, has a compact size and an increased density thanks to its stator design. The servo motor features leads with circular connections and it has a 46 millimeters flange size. The TLY-A110P-BJ62AA has a rated maximum speed of 5000 revolutions per minute. The motor should be operated by a power supply with a voltage rating of 230 Volts AC. The TLY-A110P-BJ62AA low-inertia motor uses a battery-supported multi-turn absolute encoder, it utilizes a shaft key, and it is enclosed in an enclosure with an IP50 international protection rating. The IP50 protection means that it is protected against dust but not against moisture. The TLY-A110P-BJ62AA has no brakes and no shaft seal. Additionally, the Allen-Bradley low-inertia servo motor has standard factory-designated options. The TLY-A110P-BJ62AA accommodates the TL-TRPLAT-17-23 transition plate. The plate provides a way to retrofit an N-series servo motor with a TL-series, bulletin TLY device like the TLY-A110P-BJ62AA servo motor. The retrofitting works because the TL-series motors provide the same torque rating as the N-series motors even though the TL-series motors are smaller in size. The TLY-A110P-BJ62AA has a weight of 0.29 kilograms. At 1000 revolutions per minute, the radial load force rating for the servo motor is 11 kilograms, while at 2000 and 3000 revolutions per minute, the radial load ratings for the TLY-A110P-BJ62AA stand at 9 and 7 kilograms, respectively. Note that the radial load force is applied at the center of the shaft extension.