TLY-A120P-BJ62AA

The TLY-A120P-BJ62AA is a TL-series bulletin TLY servo motor designed and manufactured by Rockwell Automation / Allen Bradley. The motor has no braking option and no shaft seal. The TLY-A120P-BJ62AA has standard factory installed options and is mounted on a standard flange with a 46 millimeter bolt circle. The enclosure for the servo motor has an International Protection rating of IP65, which does not provide protection against moisture. The TLY-A120P-BJ62AA has a magnet stack length of 2 stacks and a speed of 5000 Revolutions Per Minute. The TLY-A120P-BJ62AA uses an absolute encoder, which is responsible for monitoring the motion and position of the motor shaft. This type of encoder is necessary when the motor positioning has to be exact. Additionally, the absolute feedback encoder is backed up by a battery in case of a power failure. Note that the absolute encoder uses a serial protocol.

The TLY-A120P-BJ62AA has a continuous stall torque of 0.85 pounds per inch. The servo motor uses circular connectors and 1-meter standard cable lengths. The TLY-A120P-BJ62AA, as with other TL-series servo motors, has a low voltage rating of 230 Volts AC. Servo motor motors in this series have a compact size. The TLY-A120P-BJ62AA has a low inertia motor and a 0.000001 kilogram per meter (square) rotor inertia. The servo motor is compatible with a variety of Kinetix drives. The motor has a frame size measuring 1.81 inches and draws a continuous current of 1.03 Amperes. The TLY-A120P-BJ62AA, as with other Tl-series servo motors, is designed to offer a low-cost substitute to the MPM and MPL servo motors.