Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley TLY and TL Servo Motors TLY-A230P-BJ62AA

Product image is representative; revision or series may vary. Contact us to request a specific version.

TLY-A230P-BJ62AA

|
Need a Specific Revision?

The TLY-A230P-BJ62AA servo motor is TLY and TL series servo motor from Allen-Bradley/Rockwell Automation. It has low inertia and leads with a circular connector. The TLY-A230P-BJ62AA servo motor also has a voltage rating of 230 Volts AC. It is equipped with a 3-inch magnet stack that provides it with low inertia and its rated speed is 5000 RPM. The TLY-A230P-BJ62AA servo motor derives its feedback from a battery-backed multi-turn absolute encoder.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for TLY-A230P-BJ62AA

ManufacturerAllen Bradley
Product TypeLow-inertia Servo Motor
Product LineTLY and TL Servo Motors
Part NumberTLY-A230P-BJ62AA
UPC820919822001
Weight3.19 lbs (1.45 kg)
Voltage200V
Frame Size70 mm or NEMA 23
Magnet Stack Length30
Rated Speed5000 rpm
FeedbackMulti-turn (1), 17-bit (131,072) counts/revolution, absolute, battery-backed encoder (serial protocol)
Enclosure/Shaft KeyIP65/Shaft Key
ConnectorsCables with circular connectors, 1 m
Factory OptionsStandard Metric
View as PDF
Request a Repair

The TLY-A230P-BJ62AA is an Allen-Bradley servo motor belonging to the TLY series. The TLY-A230P-BJ62AA features tight position control with a 17-bit serial resolution. It is also a multi-turn high-resolution feedback with battery backup. The TLY-A230P-BJ62AA controls high load-to-motor rotor inertia ratios and it maintains a stable system. In addition, the TLY-A230P-BJ62AA comes with the onboard memory and it retains the motor identity. The unit has a serial communication option that automatically reports the identity to the drive. The TLY series features the 46, 70, 90, and 100-millimeter frame sizes. The TLY-A230P-BJ62AA has an integral 24 Volts braking option. The rated speed for the TLY-A230P-BJ62AA is 5000 revolutions per minute with a maximum speed of 500 revolutions per minute. The actual frame size for the TLY-A230P-BJ62AA is Frame 2 which comes with a 70 millimeters frame size.

The TLY-A230P-BJ62AA belongs to the 200 Volts AC class with an output torque of 1.3 N-m continuous. The output torque for the TLY-A230P-BJ62AA is 3.05 N-m peak. The TLY-A230P-BJ62AA comes with an operating temperature of 0 degrees Celsius and the maximum operating temperature is 70 degrees Celsius. The storage temperature for the TLY-A230P-BJ62AA is -30 degrees Celsius minimum and 70 degrees Celsius maximum. It has a relative humidity rating of 5% minimum and 95% maximum. The IP rating for the TLY-A230P-BJ62AA is IP65 with a peak shock acceleration at 20 g and a shock duration of 6 milliseconds maximum. The TLY-A230P-BJ62AA features a maximum vibration acceleration of 2.5 g and 2000 Hertz maximum.

Revision Part #Also known as
TLY-A230P-BJ62AA Ser ATLY-A230P-BJ62AA/A, Series A, Rev A
TLY-A230P-BJ62AA Ser BTLY-A230P-BJ62AA/B, Series B, Rev B
Don't see your particular revision? Contact us now.