Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley TLY and TL Servo Motors TLY-A230P-BJ64AA

Product image is representative; revision or series may vary. Contact us to request a specific version.

TLY-A230P-BJ64AA

|
Need a Specific Revision?

The Allen-Bradley/Rockwell Automation TLY-A230P-BJ64AA low-inertia servo motor has been manufactured in the TLY and TL series as a low-inertia servo motor with permanent magnet technology. It contains powerful magnets that are arranged inside it in a 3-inch stack. The TLY-A230P-BJ64AA low-inertia servo motor derives feedback for its applications from a multi-turn encoder which is battery-backed. It has a voltage rating of 230 Volts AC. The TLY-A230P-BJ64AA low-inertia servo motor comes with a holding brake that can hold its shaft at 0 RPM but that cannot be used to stop the shaft or as a safety or emergency device.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for TLY-A230P-BJ64AA

ManufacturerAllen Bradley
Product TypeLow-inertia Servo Motor
Product LineTLY and TL Servo Motors
Part NumberTLY-A230P-BJ64AA
UPC820919822018
Weight4.00 lbs (1.81 kg)
Voltage200 Volts
Frame Size70 mm or NEMA 23
Magnet Stack Length30
Rated Speed5000 RPM
FeedbackMulti-turn (1), 17-bit (131,072) counts/revolution, absolute, battery-backed encoder (serial protocol)
Enclosure/Shaft KeyIP65/Shaft Key
ConnectorsCables with circular connectors, 1 m
Factory OptionsStandard Metric
Brake24 Volts DC
View as PDF
Request a Repair

The TLY-A230P-BJ64AA is a low-inertia high-performance servo motor manufactured by Allen-Bradley. The Allen-Bradley TLY-A230P-BJ64AA Low-Inertia Servo Motor is part of the TLY Series of low-inertia servo motors. The Allen-Bradley TLY-A230P-BJ64AA Low-Inertia Servo Motor features a 200 Volts AC voltage rating, 5000 RPM of rated speed, 24 Volts DC optional brakes, 1.16 N-m of torque rating, an absolute encoder, battery-backup, and a magnetic stack length of 3. The Allen-Bradley TLY-A230P-BJ64AA Low-Inertia Servo Motor is contained in a NEMA 23 Frame. The Allen-Bradley TLY-A230P-BJ64AA Low-Inertia Servo Motor mounting method is designed for an interference function that will enhance a secure and permanent fit with the interfacing connection. The Allen-Bradley TLY-A230P-BJ64AA Low-Inertia Servo Motor is equipped with a transition cable that allows for connection to an available N-Series power source, a brake cable, and a feedback device. The Allen-Bradley TLY-A230P-BJ64AA Low-Inertia Servo Motor’s pre-installed cables provide a secure shield termination that minimizes the potential for EMI.

The user should equip the Allen-Bradley TLY-A230P-BJ64AA Low-Inertia Servo Motor with a drip loop on each cable to transfer the liquids away from the connection to the Allen-Bradley TLY-A230P-BJ64AA Low-Inertia Servo Motor. The Allen-Bradley TLY-A230P-BJ64AA Low-Inertia Servo Motor can be configured with a dynamic brake that is a spring-set holding brake which releases when the voltage is supplied to the brake coil. A separate power source is necessary for disengaging the brake and this can be obtained from the Allen-Bradley TLY-A230P-BJ64AA Low-Inertia Servo Motor controller. The user should not use the Allen-Bradley TLY-A230P-BJ64AA Low-Inertia Servo Motor holding brake to stop the rotation of the motor shaft. The holding brake should be applied to hold the motor shaft from 0 RPM up to the rated brake holding torque and the users should follow the recommended procedure to prevent motor shaft rotation. To eradicate the potential for brake wear due to an incorrect tuning of the servo system, the users are recommended to disable the Allen-Bradley TLY-A230P-BJ64AA Low-Inertia Servo Motor before servicing it.

Revision Part #Also known as
TLY-A230P-BJ64AA Ser ATLY-A230P-BJ64AA/A, Series A, Rev A
Don't see your particular revision? Contact us now.