TLY-A230T-HJ62AA

The TLY-A230T-HJ62AA is a motor that has been designed and manufactured by Allen-Bradley. This motor belongs to the TL Series of motors. The Allen-Bradley TLY-A230T-HJ62AA motor is specifically a brushless AC synchronous servo motor and it can be used with Allen-Bradley Kinetix 6000, 300/350, 3, 2000 and Ultra 3000 servo drives. This motor is equipped with circular plastic connectors and it can be used with the Kinetix 2000, 6000 or Ultra 3000 drives. It has a compact design combined with a high torque rating.

The Allen-Bradley TLY-A230T-HJ62AA motor operates with a voltage rating of 230 Volts AC and a rated speed of 6000 RPM, being one of the motors with the highest speed in the whole series. The Allen-Bradley TLY-A230T-HJ62AA motor has a diameter of 100 millimeters for the mounting bolt circle and it features a rated IP65 enclosure which protects the whole motor, including its connections. This enclosure impedes external agents from damaging the motor. Even though the motor has an enclosure, it is for general purposes. It is not recommended to expose the motor to corrosive atmospheres. The Allen-Bradley TLY-A230T-HJ62AA motor has an incremental encoder as a feedback means and connectors that are 1 meter (39.4 inches) in length. The motor has no brakes but it has a standard factory design. The operating conditions of the Allen-Bradley TLY-A230T-HJ62AA motor are a temperature range of 0 to 40 degrees Celsius and a non-condensing relative humidity range of 20 to 85%. These conditions must be met in order to preserve the life and quality of the performance.

The TLY-A220T-HJ62AA is a compact servo motor from Allen-Bradley’s TLY low-inertia servo motor series. This servo motor is essentially a Brushless AC asynchronous motor, equipped with the manufacturer’s Smart Motor Technology that enables the motor of keeping identity and parameters through the provided on-board memory module. Additionally, this same technology contributes to faster network connectivity of this motor as it is capable of being identified over a communication link.

The TLY-A220T-HJ62AA is compatible for pairing with Allen-Bradley Servo drives including the Kinetix 5100, Kinetix 5300, Kinetix 6000, Kinetix 300 / 350, Kinetix 2000 and Ultra 3000 Servo drives. This motor is a 200 Volt class, specifically operating at a nominal supply voltage of 230 Volts AC, 47-63 Hertz, wired to the motor’s mains terminal. It has a maximum rated output of 0.35 kilowatts and continuous stall Torque of 0.836 Nm 7.40 lb-in. It is a NEMA 23 Frame motor which measures 70 millimeters (2.75 inches) or and comes with a magnet stack measuring 220 millimeters. The motor’s maximum rated speed is 6000 RPM and comes with a feedback incremental encoder that features high-resolution feedback, capable of 2000 lines/revolution. It has a shaft key without a shaft seal. This servo motor has a protection rating of IP65.

For signal wiring, the TLY-A220T-HJ62AA is provided with circular connectors. This type of connector is especially designed to maintain secured connection even in high vibration and high shock environments such as servo motor applications. This connector measures 1 meter (39.4 inches) and comes with compatible hardware keying, preventing improper connection orientation.