TLY-A2530P-BJ62AA

The TLY-A2530P-BJ62AA is a low-inertia servo motor that has been manufactured by Allen Bradley, a division of Rockwell Automation. The TLY-A2530P-BJ62AA is classified under the TL series of low inertia servo motors. It comes with a voltage of 200 volts and has the NEMA 34 frame size which comes as a 90 millimeters frame size. The magnet stack length for the TLY-A2530P-BJ62AA is rated at 30 and comes with a rated speed of 5000 revolutions per minute. The TLY-A2530P-BJ62AA features the multiple turn 17-bit counts per revolution. The module also comes with absolute battery backed encoder which is a serial protocol. The TLY-A2530P-BJ62AA features the IP65 or shaft key as the enclosure key. The connector type for the TLY-A2530P-BJ62AA is cables with circular connectors and comes with the standard metric factory option.

While installing the TLY-A2530P-BJ62AA it is important to give a thoughtful design and ensure proper maintenance so as to increase the lifetime of the servo motor. The motor should be installed with the cable entry points positioned under the motor housing. This provides a drip loop in each of the cables. The drip loop is usually a downward facing bend of the cable to ensure water doesn’t get into the cable but flows just along the cable and drops down. The TLY-A2530P-BJ62AA shaft should not point upward when installing the module. This is a factor that might lead to contaminant ingress. The optional shaft should be replaced before the expected lifetime has elapsed.