TLY-A2540P-BJ62AA

The TLY-A2540P-BJ62AA is a servo motor manufactured by Allen-Bradley. It is from the TL-series of the motors from Allen-Bradley. Before starting the installation, it is recommended to go through the installation instructions provided by the manufacturer. The solid-state devices have operational characteristics which are different from the electromechanical equipment, users can find the details about them from their local Rockwell Automation sales office or on the Rockwell Automation website. The TLY-A2540P-BJ62AA is recommended to inspect the shipping packaging for any kind of damage before unpacking the product. If there is any damage, users need to contact the shipper immediately and request assistance.

If there is no damage, the users can proceed with the unpacking, remove the motor carefully from the packaging, and inspect it for any visible damage. Check the frame, shaft, and mounting pilot for any damages. The TLY-A2540P-BJ62AA is a low-inertia motor and it has led with a circular connector. It has a voltage rating of 230 Volts AC and the flange size of the motor is 90 millimeters and it has a rated speed of 5000 RPM. The motor has a battery-backed multi-turn absolute encoder feedback. The TLY-A2540P-BJ62AA’s motor assembly is housed in an IP65 housing and has 1-meter leads with a circular plastic connector. It does not have a built-in break and it comes in a standard configuration. While installing the motor, do not hit the shaft, key, couplings, or pulleys with tools during installation or removal because this may damage the motor and the bearings or the other components. Route the cables such that the cables pass below the motor and forms a drip loop.