Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley Ultra1500 Digital Servo Amplifiers 2092-DA3

Product image is representative; revision or series may vary. Contact us to request a specific version.

2092-DA3

|

The Allen-Bradley 2092-DA3 power control servo drive is manufactured by Allen-Bradley/Rockwell Automation. This drive is part of the Ultra1500 digital servo drives series and it operates on a 1-phase voltage rating of 200 to 240 Volts AC, at 50 at 60 Hertz.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 2092-DA3

ManufacturerAllen Bradley
Product TypePower Control Servo Drive
Product LineUltra1500 Digital Servo Amplifiers
Part Number2092-DA3
UPC820919236686
Weight3.00 lbs (1.36 kg)
Input Phase1
Voltage200 to 240 VAC
Frequency50/60 Hertz
Current8 A
Operating Temperature0 to 50 Degrees Celsius
Power Rating1000 W
Internal Shunt Resistance50 Ohms
Bulletin2092
Output Phase3

The 2092-DA3 drive is a power controller servo drive manufactured by Allen-Bradley/Rockwell Automation as part of the Ultra1500 digital servo drive series. This drive operates on a 1-phase supply voltage range of 200 to 240 Volts AC at a frequency of 50 to 60 Hertz. It has a current rating of 8 Amps, with a minimum operating temperature of 0 degrees Celsius, a maximum operating temperature of 50 degrees Celsius, and a power rating of 1000 Watts. The 2092-DA3 servo drive has approximate measurements of 70 x 153 x 155 millimeters. Other notable specifications include a continuous output current (RMS) of 3.3 Amps, a peak output current (RMS) of 8 Amps, and an internal shunt resistance of 50 Ohms. The AC input voltage between any 2 input power pins should not exceed the drive rating. For this reason, the transformer's secondaries must also be grounded.

The Allen-Bradley 2092-DA3 drive and other drives in the Ultra1500 drive series are limited to 1 contactor cycle for every 2 minutes. The 2092-DA3 servo drive comes with a variety of input and output specifications. It has 7 optically isolated 24 Volts rated digital inputs, as well as 33 optically isolated 24 Volts rated digital outputs. The 2092-DA3 servo drive has a vibration of 5 to 500 Hertz at 2.5 G, with an ambient storage temperature range of -20 to 80 degrees Celsius and an ambient operating temperature range of 0 to 50 degrees Celsius. It has a noncondensing relative humidity range of 5 to 95 percent, and power dissipation of 30 Watts (internal shunt).