VPF-B0753M-PJ12AF

The VPF-B0753M-PJ12AF is a food-grade motor with a multi-turn encoder that belongs to the Kinetix VP series of motors designed by Allen-Bradley. The Allen-Bradley VPF-B0753M-PJ12AF food-grade motor with a multi-turn encoder features an operating speed of 6000 RPM, this is one of the highest speeds provided by motors from this series. It has a voltage range of 400 Volts and it is an optimized motor. The Allen-Bradley VPF-B0753M-PJ12AF food-grade motor with a multi-turn encoder has a frame size of 75 millimeters, and this measure is known as the bolt circle diameter (BCD), it features 3 magnet stacks and its multi-turn encoder is a digital 18-bit digital encoder with 4096 revolutions. The Allen-Bradley VPF-B0753M-PJ12AF food-grade motor with a multi-turn encoder cable must be kept as short as possible, these should be shielded and grounded. The motor must be properly positioned with the connector located beneath the motor housing.

Another important fact to consider is that the Allen-Bradley VPF-B0753M-PJ12AF food-grade motor with a multi-turn encoder requires enough space around each side so that it can have a proper heat dissipation and in this way, the temperature can be maintained in its recommended parameters. The Allen-Bradley VPF-B0753M-PJ12AF food-grade motor with a multi-turn encoder should not be located in atmospheres that contain corrosive material, gases, or vapors and it should be used at a temperature of 0 to 40 degrees Celsius and a relative humidity of up to 95% without condensation. The housing of this motor includes a shaft seal and a shaft key. These shafts can wear out over time, it is recommended to perform periodic inspections to determine whether these should be replaced or not.