VPL-A0631M-PJ12AA

The VPL-A0631M-PJ12AA is a VP-Series Low Inertia Brushless Servo Motor manufactured by Allen-Bradley. It comes with 63-millimeter frame, a shaft key connection type, and with a multi-turn high-resolution encoder. This servo motor is attached to the electric circuit over a single SpeedTEC DIN connector. The VPL-A0631M-PJ12AA does not have a DC brake. This product is specific when it comes to its winding technology that helps this motor to yield up to 40% of higher torque per unit than similar devices on the market. This is resulting in really small dimensions of the motor that can deliver up to 0.25 Horsepower and the nominal 6000 RPM speed. To accomplish the best results with this motor, you should couple it with the Kinetix 5500 servo drive. With this kind of configuration, this compact servo motor will meet the requirements of high-performance applications that include motions seamlessly.

Furthermore, there is a special winding insulation material inside of the motor that establishes good heat transfer and enhanced thermal functioning of the device. There is an innovative design of the cable connector at the rear end of the device, that allows flexible orientation of the cable. The Allen-Bradley VPL-A0631M-PJ12AA supports all the CSA and UL standards. The device is controlled with a 200 Volt AC voltage. You can order shaft seal kits separately and replacement kits for installation in the field. Shaft seals are nitrile-based and they are delivered with a lubricant to reduce wear. This bulletin VPL servo motor is capable of operating with the maximum radial or maximum axial shaft load of 16.7 kg at 4500 RPM.