Product image is representative; revision or series may vary. Contact us to request a specific version.
VPL-A0633F-PJ12AS
The Allen-Bradley VPL-A0633F-PJ12AS servo motor is a low-inertia brushless servo motor with permanent magnet technology. It has been designed and manufactured as part of the Allen-Bradley VPL Servo Motors series. The VPL-A0633F-PJ12AS brushless servo motor operates with 200 Volts of rated voltage and with a shaft rotation speed of up to 4500 RPM. Its feedback encoder is an 18-bit multi-turn digital encoder that supports the Hiperface DSL protocol. The VPL-A0633F-PJ12AS brushless servo motor comes with a special built-in shaft seal that gives it a strong degree of protection against water and other fluids.
-
We sell industrial automation parts backed by our free 2-Year DO Supply Warranty.
-
Same-day domestic and fast international shipping with UPS, FedEx, DHL, and more.
-
AMEX, Visa, MasterCard, Discover, wire transfer, net terms, and more.
-
Repairs and exchanges are available for all automation products.
- Reseller Options
Drop shipping, blind shipping, and account shipping with no extra fees.
Technical specifications for VPL-A0633F-PJ12AS
| Manufacturer | Allen Bradley |
|---|---|
| Product Type | Low-inertia Servo Motor |
| Product Line | VPL Servo Motors |
| Part Number | VPL-A0633F-PJ12AS |
| Weight | 10.00 lbs (4.54 kg) |
| Voltage | 200V |
| Frame Size | 63 mm |
| Rated Speed | 4500 rpm |
| Magnet Stacks | 3 |
| Feedback | 18-bit absolute multi-turn digital encoder (Hiperface DSL protocol) |
| Shaft | Shaft Key |
| Connector | Single SpeedTec DIN connector, right angle, 325° rotatable |
| Mounting Flange | IEC metric, free mounting holes (type FF) |
| Factory Options | Shaft Seal |
The VPL-A0633F-PJ12AS servo motor is a permanent magnet, low-inertia rotary servo motor manufactured by Allen-Bradley. Its speed rating is 4500 revolutions per minute (RPM) and its voltage rating is 200 Volts AC. The frame size (bolt circle diameter) is 63 millimeters and the magnetic stack length is 3. The VPL-A0633F-PJ12AS servo motor is equipped with an 18-bit multi-turn digital feedback encoder with the Hiperface DSL communication protocol and the capability to provide absolute position feedback within 4096 revolutions. It comes with a shaft key for fixing couplings to the shaft and it features an IEC mounting flange with the Type FF free mounting holes. The minimum environmental protection rating is IP 50 and the servo motor’s weight is 1.68 kilograms.
The winding options of the Allen-Bradley VPL-A0633F-PJ12AS low-inertia servo motor are optimized to match the ratings of Allen-Bradley Kinetix 5500 drives and Kinetix 5700 dual-axis inverters. It is fitted out with a single SpeedTec DIN (325 degrees rotatable) connector that provides a single-cable solution for power and feedback connections, thereby eliminating the need for hardware or cable terminations. The advanced winding design of this motor makes for a high torque-to-size ratio and its powerful rare-earth magnets offer quicker acceleration. An Allen-Bradley VPL-SSN-F063075 shaft seal kit may be used to increase the environmental protection rating at the shaft of the VPL-A0633F-PJ12AS low-inertia servo motor to an IP 66 rating (to protect the bearing from debris and moisture). This motor is capable of operating with a sustained shaft load, and torsionally rigid pulley mechanisms or couplings may be used to mechanically connect the shaft to machines.
| Revision Part # | Also known as | |
|---|---|---|
| VPL-A0633F-PJ12AS Ser A | VPL-A0633F-PJ12AS/A, Series A, Rev A | |
| Don't see your particular revision? Contact us now. | ||
- VPL-A0633F-PJI2AS
- VPL-AO633F-PJ12AS
- VPL-AO633F-PJI2AS
- VPLA0633FPJ12AS
- VPLA0633FPJI2AS
- VPLAO633FPJ12AS
- VPLAO633FPJI2AS
The Allen-Bradley VPL-A0633F-PJ12AS Low-inertia Servo Motor has a 200V Voltage and a 4500 rpm Rated Speed. It also contains a 63 mm Frame Size and an IEC metric, free mounting holes (type FF) Mounting Flange.