Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley VPL Servo Motors VPL-A0753E-PJ12AA

Product image is representative; revision or series may vary. Contact us to request a specific version.

VPL-A0753E-PJ12AA

|
Need a Specific Revision?

The VPL-A0753E-PJ12AA servo motor is an Allen-Bradley/Rockwell Automation brushless servo motor from the VPL series. It can be controlled by a variety of servo drives from the Allen-Bradley/Rockwell Automation Kinetix 5500 and Kinetix 5700 series. The VPL-A0753E-PJ12AA brushless servo motor can sustain a rotation speed of up to 3500 RPM and it is part of the 200 Volts voltage class in the VPL series. Its operating temperature range is from 32 to 104 degrees Fahrenheit and its storage temperature range is from -22 to 104 degrees Fahrenheit. The VPL-A0753E-PJ12AA brushless servo motor should not be used or stored in corrosive environments.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for VPL-A0753E-PJ12AA

ManufacturerAllen Bradley
Product TypeLow-Inertia Servo Motor
Product LineVPL Servo Motors
Part NumberVPL-A0753E-PJ12AA
UPC884951955677
Weight5.25 lbs (2.38 kg)
Voltage200 Volts AC
Frame Size75 millimeters
Rated Speed3500 RPM
Magnet Stacks3
Feedback18-bit absolute multi-turn digital encoder (Hiperface DSL protocol)
ShaftShaft Key
ConnectorSingle SpeedTec DIN connector, right angle, 325° rotatable
Mounting FlangeIEC metric, free mounting holes (type FF)
Factory OptionsStandard
Request a Repair

The VPL-A0753E-PJ12AA is a low-inertia servo motor manufactured by Allen-Bradley. The Allen-Bradley VPL-A0753E-PJ12AA servo motor is part of the VPL Series of servo motors. The Allen-Bradley VPL-A0753E-PJ12AA servo motor feature 200 Volts AC voltage rating, 3500 RPM rated speed, 3 magnet stacks, an 18-bit absolute multi-turn digital encoder, a shaft key, and a single-speed Tec DIN connector. The Allen-Bradley VPL-A0753E-PJ12AA servo motor is contained in a 75-millimeter frame. The servo motor users should not use the holding brake for stopping the rotation of the motor shaft or as a safety tool. The holding brake should be used for holding the Allen-Bradley VPL-A0753E-PJ12AA servo motor shaft between 0 RPM and the rated holding torque. An additional seal is provided on the Allen-Bradley VPL-A0753E-PJ12AA servo motor shaft and placed on the front bearing, which is required when the motor shaft is subjected to significant amounts of fine dust or fluids.

When the Allen-Bradley VPL-A0753E-PJ12AA servo motor is housed in an IP66 enclosure, and environmentally sealed cables/connectors and a shaft seal will be required for efficient operation. When the Allen-Bradley VPL-A0753E-PJ12AA servo motor shaft area is free of fine dust or fluids, an additional seal and a lower rating are not recommended. The Allen-Bradley VPL-A0753E-PJ12AA servo motor connectors should be rotated into a fixed position when installing the servo motor and sustained in that position without further adjustment. The servo motor users should not use devices or excessive force when rotating the connector and they also should not rotate the connector several times. Excessive force or rotation may damage the connector seal and reduce the IP rating of the Allen-Bradley VPL-A0753E-PJ12AA servo motor. The Allen-Bradley VPL-A0753E-PJ12AA servo motor power should be switched off before connecting or disconnecting the cables to the servo motor. The potential for arcing or unexpected motion occurrence is high when the power, feedback, or brake cables are connected or disconnected.

Revision Part #Also known as
VPL-A0753E-PJ12AA Ser AVPL-A0753E-PJ12AA/A, Series A, Rev A
Don't see your particular revision? Contact us now.